[PATCH v2] ARM: dts: rename oxnas dts files

[PATCH v2] ARM: dts: rename oxnas dts files

[Daniel Golle]

Other platforms' device-tree files start with a platform prefix, such as
sun7i-a20-*.dts or at91-*.dts.
This naming scheme turns out to be handy when using multi-platform build
systems such as OpenWrt.
Prepend oxnas files with their platform prefix to comply with the naming
scheme already used for most other platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: also apply changes in Makefile

 arch/arm/boot/dts/Makefile                                            | 4 ++--
 arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts}                | 0
 ...pogoplug-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} | 0
 3 files changed, 2 insertions(+), 2 deletions(-)
 rename arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts} (100%)
 rename arch/arm/boot/dts/{cloudengines-pogoplug-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} (100%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..6a014afa0ee5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -711,8 +711,8 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
 dtb-$(CONFIG_ARCH_OXNAS) += \
-	wd-mbwe.dtb \
-	cloudengines-pogoplug-series-3.dtb
+	ox810se-wd-mbwe.dtb \
+	ox820-cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-arrow-sd-600eval.dtb \
diff --git a/arch/arm/boot/dts/wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
similarity index 100%
rename from arch/arm/boot/dts/wd-mbwe.dts
rename to arch/arm/boot/dts/ox810se-wd-mbwe.dts
diff --git a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
similarity index 100%
rename from arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
rename to arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-- 
2.15.1

[PATCH v2] ARM: dts: rename oxnas dts files

[Arnd Bergmann]

On Sat, Jan 13, 2018 at 6:35 PM, Daniel Golle <daniel@makrotopia.org> wrote:
> Other platforms' device-tree files start with a platform prefix, such as
> sun7i-a20-*.dts or at91-*.dts.
> This naming scheme turns out to be handy when using multi-platform build
> systems such as OpenWrt.
> Prepend oxnas files with their platform prefix to comply with the naming
> scheme already used for most other platforms.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>

There are few changes to oxnas in general, and Neil doesn't appear to be around
to ask at the moment.
I assume he doesn't mind me picking it up into next/dt directly.

Merged now, thanks,

        Arnd

[PATCH v2] ARM: dts: rename oxnas dts files

[Neil Armstrong]

On 15/01/2018 15:45, Arnd Bergmann wrote:
> On Sat, Jan 13, 2018 at 6:35 PM, Daniel Golle <daniel@makrotopia.org> wrote:
>> Other platforms' device-tree files start with a platform prefix, such as
>> sun7i-a20-*.dts or at91-*.dts.
>> This naming scheme turns out to be handy when using multi-platform build
>> systems such as OpenWrt.
>> Prepend oxnas files with their platform prefix to comply with the naming
>> scheme already used for most other platforms.
>>
>> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> 
> There are few changes to oxnas in general, and Neil doesn't appear to be around
> to ask at the moment.
> I assume he doesn't mind me picking it up into next/dt directly.
> 
> Merged now, thanks,
> 
>         Arnd
> 


Hi Daniel,

Thanks for pushing this change, these a low-priority supported devices, OK to rename them.

(I must no forget to changes my test scripts, or I will get a huge headache)

Arnd, thanks for taking this directly.

Neil