From mboxrd@z Thu Jan 1 00:00:00 1970 From: yixun.lan@amlogic.com (Yixun Lan) Date: Wed, 24 Jan 2018 15:05:14 +0800 Subject: [PATCH] i2c: meson: update doc description to fix build warnings Message-ID: <20180124070514.183119-1-yixun.lan@amlogic.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add description for 'data' parameter and drop unused 'irq' memeber. Here is the warnings: drivers/i2c/busses/i2c-meson.c:103: warning: No description found for parameter 'data' drivers/i2c/busses/i2c-meson.c:103: warning: Excess struct member 'irq' description in 'meson_i2c' Suggested-by: Wolfram Sang Signed-off-by: Yixun Lan --- drivers/i2c/busses/i2c-meson.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index 37c4aa76f37a..90f5d0407d73 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -69,7 +69,6 @@ struct meson_i2c_data { * @dev: Pointer to device structure * @regs: Base address of the device memory mapped registers * @clk: Pointer to clock structure - * @irq: IRQ number * @msg: Pointer to the current I2C message * @state: Current state in the driver state machine * @last: Flag set for the last message in the transfer @@ -80,6 +79,7 @@ struct meson_i2c_data { * @done: Completion used to wait for transfer termination * @tokens: Sequence of tokens to be written to the device * @num_tokens: Number of tokens + * @data: Pointer to the controlller's platform data */ struct meson_i2c { struct i2c_adapter adap; -- 2.15.1