From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ASoC: sun4i-i2s: Do not divide clocks when slave
Date: Wed, 24 Jan 2018 15:11:00 +0100 [thread overview]
Message-ID: <20180124141101.12867-3-codekipper@gmail.com> (raw)
In-Reply-To: <20180124141101.12867-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
There is no need to set the clock and calculate the division of
the audio pll for the bclk and sync signals when they are not
required.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 116 ++++++++++++++++++++++++--------------------
1 file changed, 64 insertions(+), 52 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index d7a9141514cf..626679057d0f 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -195,6 +195,8 @@ struct sun4i_i2s {
const struct sun4i_i2s_quirks *variant;
+ bool bit_clk_master;
+
unsigned int tdm_slots;
unsigned int slot_width;
};
@@ -282,67 +284,73 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
int bclk_div, mclk_div;
int ret;
- switch (rate) {
- case 176400:
- case 88200:
- case 44100:
- case 22050:
- case 11025:
- clk_rate = 22579200;
- break;
+ if (i2s->bit_clk_master) {
+ switch (rate) {
+ case 176400:
+ case 88200:
+ case 44100:
+ case 22050:
+ case 11025:
+ clk_rate = 22579200;
+ break;
- case 192000:
- case 128000:
- case 96000:
- case 64000:
- case 48000:
- case 32000:
- case 24000:
- case 16000:
- case 12000:
- case 8000:
- clk_rate = 24576000;
- break;
+ case 192000:
+ case 128000:
+ case 96000:
+ case 64000:
+ case 48000:
+ case 32000:
+ case 24000:
+ case 16000:
+ case 12000:
+ case 8000:
+ clk_rate = 24576000;
+ break;
- default:
- dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
- return -EINVAL;
- }
+ default:
+ dev_err(dai->dev, "Unsupported sample rate: %u\n", rate);
+ return -EINVAL;
+ }
- ret = clk_set_rate(i2s->mod_clk, clk_rate);
- if (ret)
- return ret;
+ ret = clk_set_rate(i2s->mod_clk, clk_rate);
+ if (ret) {
+ dev_err(dai->dev, "Unable to set clock\n");
+ return ret;
+ }
- oversample_rate = i2s->mclk_freq / rate;
- if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
- dev_err(dai->dev, "Unsupported oversample rate: %d\n",
- oversample_rate);
- return -EINVAL;
- }
+ oversample_rate = i2s->mclk_freq / rate;
+ if (!sun4i_i2s_oversample_is_valid(oversample_rate)) {
+ dev_err(dai->dev, "Unsupported oversample rate: %d\n",
+ oversample_rate);
+ return -EINVAL;
+ }
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
- if (bclk_div < 0) {
- dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
- return -EINVAL;
- }
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size);
+ if (bclk_div < 0) {
+ dev_err(dai->dev, "Unsupported BCLK divider: %d\n",
+ bclk_div);
+ return -EINVAL;
+ }
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate, rate);
- if (mclk_div < 0) {
- dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
- return -EINVAL;
- }
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate);
+ if (mclk_div < 0) {
+ dev_err(dai->dev, "Unsupported MCLK divider: %d\n",
+ mclk_div);
+ return -EINVAL;
+ }
- /* Adjust the clock division values if needed */
- bclk_div += i2s->variant->bclk_offset;
- mclk_div += i2s->variant->mclk_offset;
+ /* Adjust the clock division values if needed */
+ bclk_div += i2s->variant->bclk_offset;
+ mclk_div += i2s->variant->mclk_offset;
- regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
- SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
- SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
+ regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
+ SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
+ SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
- regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+ regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
+ }
/* Set sync period */
if (i2s->variant->has_fmt_set_lrck_period)
@@ -501,10 +509,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
case SND_SOC_DAIFMT_CBS_CFS:
/* BCLK and LRCLK master */
val = SUN4I_I2S_CTRL_MODE_MASTER;
+ i2s->bit_clk_master = true;
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* BCLK and LRCLK slave */
val = SUN4I_I2S_CTRL_MODE_SLAVE;
+ i2s->bit_clk_master = false;
break;
default:
dev_err(dai->dev, "Unsupported slave setting: %d\n",
@@ -525,10 +535,12 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
/* BCLK and LRCLK master */
val = SUN8I_I2S_CTRL_BCLK_OUT |
SUN8I_I2S_CTRL_LRCK_OUT;
+ i2s->bit_clk_master = true;
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* BCLK and LRCLK slave */
val = 0;
+ i2s->bit_clk_master = false;
break;
default:
dev_err(dai->dev, "Unsupported slave setting: %d\n",
--
2.16.0
next prev parent reply other threads:[~2018-01-24 14:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-24 14:10 [PATCH 0/3] ASoC: sun4i-i2s: Updates to the driver codekipper at gmail.com
2018-01-24 14:10 ` [PATCH 1/3] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper at gmail.com
2018-01-29 1:50 ` [linux-sunxi] " Chen-Yu Tsai
2018-01-29 7:34 ` Code Kipper
2018-01-29 7:38 ` Chen-Yu Tsai
2018-01-29 7:52 ` Code Kipper
2018-01-29 8:40 ` Maxime Ripard
2018-01-29 11:32 ` Mark Brown
2018-01-29 12:28 ` Code Kipper
2018-01-29 12:31 ` Mark Brown
2018-01-24 14:11 ` codekipper at gmail.com [this message]
2018-01-25 2:33 ` [linux-sunxi] [PATCH 2/3] ASoC: sun4i-i2s: Do not divide clocks when slave Chen-Yu Tsai
2018-01-24 14:11 ` [PATCH 3/3] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper at gmail.com
2018-01-24 17:41 ` Code Kipper
2018-01-25 8:41 ` Maxime Ripard
2018-01-25 9:03 ` Code Kipper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180124141101.12867-3-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).