From mboxrd@z Thu Jan 1 00:00:00 1970 From: embed3d@gmail.com (Philipp Rossak) Date: Fri, 26 Jan 2018 16:19:38 +0100 Subject: [PATCH 13/16] arm: dts: sun8i: h3: add thermal zone to H3 In-Reply-To: <20180126151941.12183-1-embed3d@gmail.com> References: <20180126151941.12183-1-embed3d@gmail.com> Message-ID: <20180126151941.12183-14-embed3d@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds the thermal zones to the H3. We have only one sensor and that is placed in the cpu. Signed-off-by: Philipp Rossak --- arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fbb007e5798e..3f83f6a27c74 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -72,6 +72,15 @@ }; }; + thermal-zones { + cpu-thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , -- 2.11.0