linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg
Date: Mon, 29 Jan 2018 00:29:07 +0100	[thread overview]
Message-ID: <20180128232919.12639-5-embed3d@gmail.com> (raw)
In-Reply-To: <20180128232919.12639-1-embed3d@gmail.com>

For adding newer sensor some basic rework of the code is necessary.

This commit reworks the code and allows the sampling start/end code and
the position of value readout register to be altered. Later the start/end
functions will be used to configure the ths and start/stop the
sampling.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
 drivers/iio/adc/sun4i-gpadc-iio.c | 44 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 03804ff9c006..db57d9fffe48 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -49,6 +49,15 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
 	return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
 }
 
+struct sun4i_gpadc_iio;
+
+/*
+ * Prototypes for these functions, which enable these functions to be
+ * referenced in gpadc_data structures.
+ */
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
+
 struct gpadc_data {
 	int		temp_offset;
 	int		temp_scale;
@@ -56,6 +65,9 @@ struct gpadc_data {
 	unsigned int	tp_adc_select;
 	unsigned int	(*adc_chan_select)(unsigned int chan);
 	unsigned int	adc_chan_mask;
+	unsigned int	temp_data;
+	int		(*sample_start)(struct sun4i_gpadc_iio *info);
+	int		(*sample_end)(struct sun4i_gpadc_iio *info);
 };
 
 static const struct gpadc_data sun4i_gpadc_data = {
@@ -65,6 +77,9 @@ static const struct gpadc_data sun4i_gpadc_data = {
 	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun4i_gpadc_chan_select,
 	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+	.temp_data = SUN4I_GPADC_TEMP_DATA,
+	.sample_start = sun4i_gpadc_sample_start,
+	.sample_end = sun4i_gpadc_sample_end,
 };
 
 static const struct gpadc_data sun5i_gpadc_data = {
@@ -74,6 +89,9 @@ static const struct gpadc_data sun5i_gpadc_data = {
 	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun4i_gpadc_chan_select,
 	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+	.temp_data = SUN4I_GPADC_TEMP_DATA,
+	.sample_start = sun4i_gpadc_sample_start,
+	.sample_end = sun4i_gpadc_sample_end,
 };
 
 static const struct gpadc_data sun6i_gpadc_data = {
@@ -83,12 +101,18 @@ static const struct gpadc_data sun6i_gpadc_data = {
 	.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun6i_gpadc_chan_select,
 	.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
+	.temp_data = SUN4I_GPADC_TEMP_DATA,
+	.sample_start = sun4i_gpadc_sample_start,
+	.sample_end = sun4i_gpadc_sample_end,
 };
 
 static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.temp_offset = -1662,
 	.temp_scale = 162,
 	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
+	.temp_data = SUN4I_GPADC_TEMP_DATA,
+	.sample_start = sun4i_gpadc_sample_start,
+	.sample_end = sun4i_gpadc_sample_end,
 };
 
 struct sun4i_gpadc_iio {
@@ -277,7 +301,7 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
 	if (info->no_irq) {
 		pm_runtime_get_sync(indio_dev->dev.parent);
 
-		regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
+		regmap_read(info->regmap, info->data->temp_data, val);
 
 		pm_runtime_mark_last_busy(indio_dev->dev.parent);
 		pm_runtime_put_autosuspend(indio_dev->dev.parent);
@@ -382,10 +406,8 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int sun4i_gpadc_runtime_suspend(struct device *dev)
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
 {
-	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
-
 	/* Disable the ADC on IP */
 	regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
 	/* Disable temperature sensor on IP */
@@ -394,10 +416,15 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int sun4i_gpadc_runtime_resume(struct device *dev)
+static int sun4i_gpadc_runtime_suspend(struct device *dev)
 {
 	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
 
+	return info->data->sample_end(info);
+}
+
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
+{
 	/* clkin = 6MHz */
 	regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
 		     SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
@@ -415,6 +442,13 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
 	return 0;
 }
 
+static int sun4i_gpadc_runtime_resume(struct device *dev)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+
+	return info->data->sample_start(info);
+}
+
 static int sun4i_gpadc_get_temp(void *data, int *temp)
 {
 	struct sun4i_gpadc_iio *info = data;
-- 
2.11.0

  parent reply	other threads:[~2018-01-28 23:29 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-28 23:29 [PATCH v2 00/16] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 01/16] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T Philipp Rossak
2018-01-29  9:19   ` Maxime Ripard
2018-01-29 12:30     ` Philipp Rossak
2018-01-31 17:40   ` Quentin Schulz
2018-01-31 18:14     ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 02/16] arm: config: sunxi_defconfig: enable SUN4I_GPADC Philipp Rossak
2018-01-29  9:21   ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak [this message]
2018-01-29  9:27   ` [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg Maxime Ripard
2018-01-31 17:51   ` Quentin Schulz
2018-01-31 18:35     ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 05/16] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset Philipp Rossak
2018-01-29  9:31   ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 06/16] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors Philipp Rossak
2018-01-29  9:37   ` Maxime Ripard
2018-01-31 18:42   ` Quentin Schulz
2018-02-02 14:13     ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 07/16] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data Philipp Rossak
2018-01-29  9:40   ` Maxime Ripard
2018-01-29 12:33     ` Philipp Rossak
2018-01-30  8:36       ` Maxime Ripard
2018-02-02 15:24         ` Philipp Rossak
2018-01-31 22:49   ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support Philipp Rossak
2018-01-31 19:07   ` Quentin Schulz
2018-02-02 14:30     ` Philipp Rossak
2018-01-31 21:47   ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 09/16] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Philipp Rossak
2018-01-29  9:46   ` Maxime Ripard
2018-01-31 19:23   ` Quentin Schulz
2018-02-02 14:42     ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T " Philipp Rossak
2018-01-29  9:48   ` Maxime Ripard
2018-01-29 11:53     ` Philipp Rossak
2018-01-30  8:32       ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 11/16] arm: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 Philipp Rossak
2018-01-29  9:49   ` Maxime Ripard
2018-01-29 11:54     ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 12/16] arm: dts: sun8i: h3: add support for the thermal sensor in H3 Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3 Philipp Rossak
2018-01-29  9:50   ` Maxime Ripard
2018-01-29 11:56     ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller Philipp Rossak
2018-01-29  9:52   ` Maxime Ripard
2018-01-29 12:03     ` Philipp Rossak
2018-04-19 15:11       ` [linux-sunxi] " Kyle Evans
2018-04-19 15:13         ` Icenowy Zheng
2018-04-19 15:19           ` Kyle Evans
2018-04-20  9:35             ` Philipp Rossak
2018-07-24 17:19               ` Paul Kocialkowski
2018-07-25  9:05                 ` Emmanuel Vadot
2018-07-25  9:12                   ` Paul Kocialkowski
2018-01-28 23:29 ` [PATCH v2 15/16] arm: dts: sun8i: a83t: add support for the thermal sensor in A83T Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T Philipp Rossak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180128232919.12639-5-embed3d@gmail.com \
    --to=embed3d@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).