From mboxrd@z Thu Jan 1 00:00:00 1970 From: embed3d@gmail.com (Philipp Rossak) Date: Mon, 29 Jan 2018 16:58:10 +0100 Subject: [PATCH v4 6/6] arm: dts: sun8i: h3-h8: ir register size should be the whole memory block In-Reply-To: <20180129155810.7867-1-embed3d@gmail.com> References: <20180129155810.7867-1-embed3d@gmail.com> Message-ID: <20180129155810.7867-7-embed3d@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The size of the register should be the size of the whole memory block, not just the registers, that are needed. Signed-off-by: Philipp Rossak --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 8d40c00d64bb..a9caeda4a574 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -674,7 +674,7 @@ clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; interrupts = ; - reg = <0x01f02000 0x40>; + reg = <0x01f02000 0x400>; status = "disabled"; }; -- 2.11.0