From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2] tlv320dac33: Add device tree bindings
Date: Wed, 31 Jan 2018 20:01:12 +0100 [thread overview]
Message-ID: <20180131190112.GA31608@amd> (raw)
In-Reply-To: <20180129230539.GA18280@amd>
This adds device tree bindings for tlv320dac33.c.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
new file mode 100644
index 0000000..7fdda95
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
@@ -0,0 +1,32 @@
+Texas Instruments - tlv320dac33 Codec module
+
+The tlv320dac33 serial control bus communicates through I2C protocols.
+
+Required properties:
+
+- compatible - "ti,tlv320dac33"
+- reg - I2C slave address
+
+Optional properties:
+
+- reset-gpios - gpio pin to power the device, active low
+
+- interrupts - The interrupt output from the device.
+- interrupt-parent - The parent interrupt controller.
+
+- ti,keep-bclk - Keep the BCLK running in FIFO modes
+- ti,burst-bclkdiv - BCLK divider value in burst mode
+
+Example:
+
+tlv320dac33: audio-codec at 19 {
+ compatible = "ti,tlv320dac33";
+ reg = <0x19>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */
+ reset-gpios = <&gpio2 28 0>; /* gpio_60 */
+
+ ti,keep-bclk;
+ ti,burst-bclkdiv = <3>;
+};
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180131/34a0b3cf/attachment.sig>
next prev parent reply other threads:[~2018-01-31 19:01 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-29 23:05 [PATCH] sound/tlv320dac33: Add device tree support Pavel Machek
2018-01-29 23:20 ` Ladislav Michl
2018-01-29 23:33 ` Pavel Machek
2018-01-30 8:34 ` Ladislav Michl
2018-01-30 8:53 ` Pavel Machek
2018-01-30 9:11 ` Filip Matijević
2018-01-30 9:38 ` Ladislav Michl
2018-01-30 10:00 ` Pavel Machek
2018-01-30 10:10 ` Ladislav Michl
2018-01-30 10:35 ` Pavel Machek
2018-01-30 11:38 ` Ladislav Michl
2018-01-31 9:24 ` [alsa-devel] " Peter Ujfalusi
2018-01-30 11:32 ` Mark Brown
2018-01-30 12:28 ` Pavel Machek
2018-01-31 9:12 ` [alsa-devel] " Peter Ujfalusi
2018-01-31 19:01 ` Pavel Machek [this message]
2018-02-01 7:39 ` [PATCHv2] tlv320dac33: Add device tree bindings Peter Ujfalusi
2018-02-05 8:24 ` [PATCHv3] " Pavel Machek
2018-02-06 12:11 ` Mark Brown
2018-02-06 13:49 ` Pavel Machek
2018-02-06 15:27 ` Mark Brown
2018-02-24 20:57 ` Pavel Machek
2018-03-05 12:52 ` Peter Ujfalusi
2018-02-09 2:25 ` Rob Herring
2018-02-05 6:08 ` [PATCHv2] " Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180131190112.GA31608@amd \
--to=pavel@ucw.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).