[PATCH v2 10/16] mmc: sdhci: Fix to use data_timer only for data line commands

[kishon@ti.com (Kishon Vijay Abraham I)]

commit d7422fb489eee5587d3eec ("mmc: sdhci: Separate timer timeout for
command and data requests") while separating timer timeout for
command and data requests, passed cmd->mrq to sdhci_mod_timer (cmd is an
argument to sdhci_send_command) and in sdhci_mod_timer used mrq->cmd
to check if it is a data line command. This results in using
data timer for commands like MMC_SET_BLOCK_COUNT (CMD23) though it is
not a data line command. Fix it here.

Fixes: commit d7422fb489eee5587d3eec ("mmc: sdhci: Separate timer timeout for
command and data requests")

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 1aa74b4682f3..0489572d1892 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1073,10 +1073,10 @@ static void sdhci_finish_data(struct sdhci_host *host)
 	}
 }
 
-static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
+static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_command *cmd,
 			    unsigned long timeout)
 {
-	if (sdhci_data_line_cmd(mrq->cmd))
+	if (sdhci_data_line_cmd(cmd))
 		mod_timer(&host->data_timer, timeout);
 	else
 		mod_timer(&host->timer, timeout);
@@ -1135,7 +1135,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
 	else
 		timeout += 10 * HZ;
-	sdhci_mod_timer(host, cmd->mrq, timeout);
+	sdhci_mod_timer(host, cmd, timeout);
 
 	host->cmd = cmd;
 	if (sdhci_data_line_cmd(cmd)) {
-- 
2.11.0