From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/16] mmc: sdhci-omap: Add custom set_uhs_signaling sdhci_host ops
Date: Mon, 5 Feb 2018 18:20:16 +0530 [thread overview]
Message-ID: <20180205125029.21570-4-kishon@ti.com> (raw)
In-Reply-To: <20180205125029.21570-1-kishon@ti.com>
UHS-1 DDR50 and MMC DDR52 mode require DDR bit to be
set in the configuration register (MMCHS_CON). Add
sdhci-omap specific set_uhs_signaling ops to set
this bit. Also while setting the UHSMS bit, clock should be
disabled.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-omap.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index df927f3faaf6..86b6cc0a5380 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -31,6 +31,7 @@
#define SDHCI_OMAP_CON 0x12c
#define CON_DW8 BIT(5)
#define CON_DMA_MASTER BIT(20)
+#define CON_DDR BIT(19)
#define CON_CLKEXTFREE BIT(16)
#define CON_PADEN BIT(15)
#define CON_INIT BIT(1)
@@ -461,6 +462,26 @@ static void sdhci_omap_init_74_clocks(struct sdhci_host *host, u8 power_mode)
enable_irq(host->irq);
}
+static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+ sdhci_omap_stop_clock(omap_host);
+
+ reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
+ if (timing == MMC_TIMING_UHS_DDR50 || timing == MMC_TIMING_MMC_DDR52)
+ reg |= CON_DDR;
+ else
+ reg &= ~CON_DDR;
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
+
+ sdhci_set_uhs_signaling(host, timing);
+ sdhci_omap_start_clock(omap_host);
+}
+
static struct sdhci_ops sdhci_omap_ops = {
.set_clock = sdhci_omap_set_clock,
.set_power = sdhci_omap_set_power,
@@ -470,7 +491,7 @@ static struct sdhci_ops sdhci_omap_ops = {
.set_bus_width = sdhci_omap_set_bus_width,
.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
.reset = sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = sdhci_omap_set_uhs_signaling,
};
static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)
--
2.11.0
next prev parent reply other threads:[~2018-02-05 12:50 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-05 12:50 [PATCH v2 00/16] mmc: sdhci-omap: Add UHS/HS200 mode support Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 01/16] mmc: sdhci-omap: Update 'power_mode' outside sdhci_omap_init_74_clocks Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 02/16] mmc: sdhci-omap: Add card_busy host ops Kishon Vijay Abraham I
2018-02-05 12:50 ` Kishon Vijay Abraham I [this message]
2018-02-05 12:50 ` [PATCH v2 04/16] mmc: sdhci-omap: Add tuning support Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 05/16] mmc: sdhci-omap: Workaround for Errata i802 Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 06/16] mmc: sdhci_omap: Add support to set IODELAY values Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 07/16] mmc: sdhci_omap: Fix sdhci-omap quirks Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 08/16] mmc: sdhci-omap: Add support to override f_max and iodelay from pdata Kishon Vijay Abraham I
2018-02-14 9:53 ` Ulf Hansson
2018-02-14 17:24 ` Tony Lindgren
2018-02-16 8:08 ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 09/16] mmc: sdhci: Add quirk to disable HW timeout Kishon Vijay Abraham I
2018-02-19 8:51 ` Adrian Hunter
2018-03-05 9:30 ` Kishon Vijay Abraham I
2018-03-05 9:38 ` Adrian Hunter
2018-03-14 13:25 ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 10/16] mmc: sdhci: Fix to use data_timer only for data line commands Kishon Vijay Abraham I
2018-02-19 8:03 ` Adrian Hunter
2018-02-19 12:55 ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 11/16] mmc: sdhci: Program a relatively accurate SW timeout value Kishon Vijay Abraham I
2018-02-16 7:17 ` Kishon Vijay Abraham I
2018-02-19 9:24 ` Adrian Hunter
2018-02-19 13:13 ` Adrian Hunter
2018-02-05 12:50 ` [PATCH v2 12/16] mmc: sdhci-omap: Workaround for Errata i834 Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 13/16] dt-bindings: sdhci-omap: Add K2G specific binding Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 14/16] mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 15/16] mmc: sdhci-omap: Add SPDX identifier Kishon Vijay Abraham I
2018-02-05 21:50 ` Joe Perches
2018-02-19 9:33 ` Adrian Hunter
2018-02-05 12:50 ` [PATCH v2 16/16] ARM: OMAP2+: Use sdhci-omap specific pdata-quirks for MMC/SD on DRA74x EVM Kishon Vijay Abraham I
2018-02-14 10:38 ` [PATCH v2 00/16] mmc: sdhci-omap: Add UHS/HS200 mode support Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180205125029.21570-4-kishon@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).