From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Tue, 6 Feb 2018 09:29:08 +0100 Subject: [linux-sunxi] [PATCH v3] ARM: sun8i: h2+: add support for Banana Pi M2 Zero board In-Reply-To: References: <20171224054029.12278-1-icenowy@aosc.io> <20180205133625.vcz73qck5kfihalv@flea> Message-ID: <20180206082908.jlmnsicnhpgankwf@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Feb 06, 2018 at 10:51:04AM +0800, Icenowy Zheng wrote: > ? 2018?2?5? GMT+08:00 ??9:36:25, Maxime Ripard ??: > >On Sat, Feb 03, 2018 at 05:45:52PM +1100, Julian Calaby wrote: > >> Hi all, > >> > >> On Sun, Dec 24, 2017 at 4:40 PM, Icenowy Zheng > >wrote: > >> > Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a > >form > >> > factor and GPIO holes similar to Raspberry Pi Zero. > >> > > >> > It features: > >> > - Allwinner H2+ SoC > >> > - Single-chip (16-bit) 512MiB DDR3 DRAM > >> > - Ampak AP6212 Wi-Fi/Bluetooth module > >> > - MicroSD slot > >> > - Two MicroUSB Type-B ports (one can only be used to power the > >board and > >> > the other features OTG functionality) > >> > - Two keys, a reset and a GPIO-connected key. > >> > - HDMI Type-C (miniHDMI) connector connected to the HDMI part of > >H2+. > >> > - CSI connector to connect the camera sensor provided by Sinovoip. > >> > > >> > Signed-off-by: Icenowy Zheng > >> > >> [Trimmed lots of non-sunxi-specific mailing lists] > >> > >> Did support for this board ever get merged? > > > >It doesn't look like it did. > > Is there any problem in this patch now except the > absense of SPDX license usage? Doesn't look like it. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: