From mboxrd@z Thu Jan 1 00:00:00 1970 From: marcus.folkesson@gmail.com (Marcus Folkesson) Date: Fri, 9 Feb 2018 20:27:22 +0100 Subject: [PATCH 5/7] watchdog: mtk: allow setting timeout in devicetree In-Reply-To: <20180209192724.1227-1-marcus.folkesson@gmail.com> References: <20180209192724.1227-1-marcus.folkesson@gmail.com> Message-ID: <20180209192724.1227-6-marcus.folkesson@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson --- Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 4 ++++ drivers/watchdog/mtk_wdt.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 5b38a30e608c..859dee167b91 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -11,9 +11,13 @@ Required properties: - reg : Specifies base physical address and size of the registers. +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example: wdt: watchdog at 10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x18>; + timeout-sec = <10>; }; diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 7ed417a765c7..fcdc10ec28a3 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -57,7 +57,7 @@ #define DRV_VERSION "1.0" static bool nowayout = WATCHDOG_NOWAYOUT; -static unsigned int timeout = WDT_MAX_TIMEOUT; +static unsigned int timeout; struct mtk_wdt_dev { struct watchdog_device wdt_dev; -- 2.15.1