From mboxrd@z Thu Jan 1 00:00:00 1970 From: marcus.folkesson@gmail.com (Marcus Folkesson) Date: Fri, 9 Feb 2018 20:27:23 +0100 Subject: [PATCH 6/7] watchdog: meson: allow setting timeout in devicetree In-Reply-To: <20180209192724.1227-1-marcus.folkesson@gmail.com> References: <20180209192724.1227-1-marcus.folkesson@gmail.com> Message-ID: <20180209192724.1227-7-marcus.folkesson@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson --- Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++ drivers/watchdog/meson_wdt.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt index 8a6d84cb36c9..7588cc3971bf 100644 --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt @@ -9,9 +9,13 @@ Required properties: "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs - reg : Specifies base physical address and size of the registers. +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example: wdt: watchdog at c1109900 { compatible = "amlogic,meson6-wdt"; reg = <0xc1109900 0x8>; + timeout-sec = <10>; }; diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c index 304274c67735..cd0275a6cdac 100644 --- a/drivers/watchdog/meson_wdt.c +++ b/drivers/watchdog/meson_wdt.c @@ -36,7 +36,7 @@ #define MESON_SEC_TO_TC(s, c) ((s) * (c)) static bool nowayout = WATCHDOG_NOWAYOUT; -static unsigned int timeout = MESON_WDT_TIMEOUT; +static unsigned int timeout; struct meson_wdt_data { unsigned int enable; -- 2.15.1