public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: enric.balletbo@collabora.com (Enric Balletbo i Serra)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/6] drm/rockchip: cdn-dp: remove the DP phy switch
Date: Wed, 14 Feb 2018 17:54:47 +0100	[thread overview]
Message-ID: <20180214165447.12181-6-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20180214165447.12181-1-enric.balletbo@collabora.com>

From: Chris Zhong <zyw@rock-chips.com>

There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence
only one PHY can connect to DP controller at one time, the other should
be disconnected. The GRF_SOC_CON26 register has a switch bit to do it,
set this bit means enable PHY 1, clear this bit means enable PHY 0.

If the board has 2 Type-C ports, the DP driver get the phy id from
devm_of_phy_get_by_index, and then control this switch according to
this id. But some others board only has one Type-C port, it may be PHY 0
or PHY 1. The dts node id can not tell us the correct PHY id. Hence move
this switch to PHY driver, the PHY driver can distinguish between PHY 0
and PHY 1, and then write the correct register bit.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes since v1:
- This patch is new on these series and is related to [5/6] so I
  included to this series. Like [5/6] the patch was send some time ago [1]
  but got stuck, so it's also and attempt to revive it.

[1] https://lkml.org/lkml/2017/2/10/74

 drivers/gpu/drm/rockchip/cdn-dp-core.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index ec999d9f15f6..c6fbdcd87c16 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -43,8 +43,6 @@
 #define GRF_SOC_CON9		0x6224
 #define DP_SEL_VOP_LIT		BIT(12)
 #define GRF_SOC_CON26		0x6268
-#define UPHY_SEL_BIT		3
-#define UPHY_SEL_MASK		BIT(19)
 #define DPTX_HPD_SEL		(3 << 12)
 #define DPTX_HPD_DEL		(2 << 12)
 #define DPTX_HPD_SEL_MASK	(3 << 28)
@@ -394,11 +392,6 @@ static int cdn_dp_enable_phy(struct cdn_dp_device *dp, struct cdn_dp_port *port)
 	union extcon_property_value property;
 	int ret;
 
-	ret = cdn_dp_grf_write(dp, GRF_SOC_CON26,
-			       (port->id << UPHY_SEL_BIT) | UPHY_SEL_MASK);
-	if (ret)
-		return ret;
-
 	if (!port->phy_enabled) {
 		ret = phy_power_on(port->phy);
 		if (ret) {
-- 
2.15.1

  parent reply	other threads:[~2018-02-14 16:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-14 16:54 [PATCH v2 1/6] phy: rockchip-typec: deprecate some DT properties for various register fields Enric Balletbo i Serra
2018-02-14 16:54 ` [PATCH v2 2/6] dt-bindings: phy-rockchip-typec: deprecate some register properties Enric Balletbo i Serra
2018-02-15 16:10   ` Heiko Stuebner
2018-02-14 16:54 ` [PATCH v2 3/6] phy: rockchip-typec: enable usb3 host during usb3 phy power on Enric Balletbo i Serra
2018-02-14 16:54 ` [PATCH v2 4/6] phy: rockchip-typec: force to USB2 if DP at 4 lanes mode Enric Balletbo i Serra
2018-02-14 16:54 ` [PATCH v2 5/6] phy: rockchip-typec: support DP phy switch Enric Balletbo i Serra
2018-02-14 16:54 ` Enric Balletbo i Serra [this message]
2018-02-15 16:06 ` [PATCH v2 1/6] phy: rockchip-typec: deprecate some DT properties for various register fields Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180214165447.12181-6-enric.balletbo@collabora.com \
    --to=enric.balletbo@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox