From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] arm64: add support for i.MX8M EVK board
Date: Fri, 23 Feb 2018 11:46:53 +0800 [thread overview]
Message-ID: <20180223034652.GM3217@dragon> (raw)
In-Reply-To: <1517829046.3175.9.camel@pengutronix.de>
Hi Lucas,
On Mon, Feb 05, 2018 at 12:10:46PM +0100, Lucas Stach wrote:
> I've pushed a branch with all the MX8M work to:
> https://git.pengutronix.de/git/lst/linux mx8-work
I have some problem to boot the kernel (and dtb) built from this branch.
I'm running an U-Boot from NXP which works fine with NXP kernel for
sure. But using this U-Boot to load your kernel gives me nothing on
serial, even if I put 'earlycon=ec_imx6q,0x30860000' on kernel
cmdline. Anything I'm missing here? Thanks.
Shawn
---8<--------------------------
U-Boot 2017.03-00779-g777f3b0e3c60 (Jan 31 2018 - 13:54:54 +0800)
CPU: Freescale i.MX8MQ rev2.0 1500 MHz (running at 1000 MHz)
CPU: Commercial temperature grade (0C to 95C) at 30C
Reset cause: POR
Model: Freescale i.MX8MQ EVK
DRAM: 3 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
BuildInfo:
- ATF 0
- U-Boot 2017.03-00779-g777f3b0e3c60
switch to partitions #0, OK
mmc1 is current device
Net: eth0: ethernet@30be0000
Normal Boot
Hit any key to stop autoboot: 0
u-boot=> tftpboot 0x42000000 Image; tftpboot 0x48000000 imx8mq-evk.dtb;
booti 0x42000000 - 0x48000000
Using ethernet at 30be0000 device
TFTP from server 192.168.0.102; our IP address is 192.168.0.110
Filename 'Image'.
Load address: 0x42000000
Loading:
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###########################################
10.1 MiB/s
done
Bytes transferred = 17803776 (10faa00 hex)
Using ethernet at 30be0000 device
TFTP from server 192.168.0.102; our IP address is 192.168.0.110
Filename 'imx8mq-evk.dtb'.
Load address: 0x48000000
Loading: #
6.2 MiB/s
done
Bytes transferred = 12999 (32c7 hex)
## Flattened Device Tree blob at 48000000
Booting using the fdt blob at 0x48000000
reserving fdt memory region: addr=40000000 size=20000
Using Device Tree in place at 0000000048000000, end 00000000480062c6
Starting kernel ...
next prev parent reply other threads:[~2018-02-23 3:46 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-01 18:31 [PATCH v2 1/4] arm64: add basic Kconfig symbols for i.MX8 Lucas Stach
2018-02-01 18:31 ` [PATCH v2 2/4] arm64: add basic DTS for i.MX8MQ Lucas Stach
2018-02-02 8:13 ` Jacky Bai
2018-02-05 8:45 ` Shawn Guo
2018-02-05 9:07 ` Jacky Bai
2018-02-05 6:09 ` Rob Herring
2018-02-05 15:00 ` Marc Zyngier
2018-02-25 10:47 ` A.s. Dong
2018-02-26 3:17 ` Shawn Guo
2018-02-26 6:52 ` A.s. Dong
2018-02-26 7:09 ` Shawn Guo
2018-02-26 8:07 ` A.s. Dong
2018-03-09 3:23 ` Shawn Guo
2018-02-01 18:31 ` [PATCH v2 3/4] arm64: add support for i.MX8M EVK board Lucas Stach
2018-02-05 6:09 ` Rob Herring
2018-02-05 7:24 ` Baruch Siach
2018-02-05 11:10 ` Lucas Stach
2018-02-23 3:46 ` Shawn Guo [this message]
2018-02-23 4:32 ` Baruch Siach
2018-02-23 7:05 ` Shawn Guo
2018-02-23 15:03 ` Shawn Guo
2018-02-23 15:30 ` Juergen Borleis
2018-02-23 15:46 ` Lucas Stach
2018-02-24 2:58 ` Bough Chen
2018-02-24 6:00 ` Shawn Guo
2018-02-25 9:54 ` A.s. Dong
2018-02-23 15:45 ` Lucas Stach
2018-02-25 10:00 ` A.s. Dong
2018-02-01 18:31 ` [PATCH v2 4/4] MAINTAINERS: add i.MX8 DT path to i.MX architecture Lucas Stach
2018-02-23 14:56 ` [PATCH v2 1/4] arm64: add basic Kconfig symbols for i.MX8 Shawn Guo
2018-02-25 10:17 ` A.s. Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180223034652.GM3217@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).