linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: cdall@kernel.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 04/40] KVM: arm64: Rework hyp_panic for VHE and non-VHE
Date: Tue, 27 Feb 2018 12:33:53 +0100	[thread overview]
Message-ID: <20180227113429.637-5-cdall@kernel.org> (raw)
In-Reply-To: <20180227113429.637-1-cdall@kernel.org>

From: Christoffer Dall <christoffer.dall@linaro.org>

VHE actually doesn't rely on clearing the VTTBR when returning to the
host kernel, and that is the current key mechanism of hyp_panic to
figure out how to attempt to return to a state good enough to print a
panic statement.

Therefore, we split the hyp_panic function into two functions, a VHE and
a non-VHE, keeping the non-VHE version intact, but changing the VHE
behavior.

The vttbr_el2 check on VHE doesn't really make that much sense, because
the only situation where we can get here on VHE is when the hypervisor
assembly code actually called into hyp_panic, which only happens when
VBAR_EL2 has been set to the KVM exception vectors.  On VHE, we can
always safely disable the traps and restore the host registers at this
point, so we simply do that unconditionally and call into the panic
function directly.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
---

Notes:
    Changes since v1:
     - Fixed typos in the commit message
     - Still use the generic __deactivte_traps() function in the hyp panic
       code until we rework that logic later.

 arch/arm64/kvm/hyp/switch.c | 42 +++++++++++++++++++++++-------------------
 1 file changed, 23 insertions(+), 19 deletions(-)

diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 46717da75643..579d9a263853 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -439,10 +439,20 @@ int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 static const char __hyp_panic_string[] = "HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%p\n";
 
 static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par,
-					     struct kvm_vcpu *vcpu)
+					     struct kvm_cpu_context *__host_ctxt)
 {
+	struct kvm_vcpu *vcpu;
 	unsigned long str_va;
 
+	vcpu = __host_ctxt->__hyp_running_vcpu;
+
+	if (read_sysreg(vttbr_el2)) {
+		__timer_disable_traps(vcpu);
+		__deactivate_traps(vcpu);
+		__deactivate_vm(vcpu);
+		__sysreg_restore_host_state(__host_ctxt);
+	}
+
 	/*
 	 * Force the panic string to be loaded from the literal pool,
 	 * making sure it is a kernel address and not a PC-relative
@@ -456,37 +466,31 @@ static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par,
 		       read_sysreg(hpfar_el2), par, vcpu);
 }
 
-static void __hyp_text __hyp_call_panic_vhe(u64 spsr, u64 elr, u64 par,
-					    struct kvm_vcpu *vcpu)
+static void __hyp_call_panic_vhe(u64 spsr, u64 elr, u64 par,
+				 struct kvm_cpu_context *host_ctxt)
 {
+	struct kvm_vcpu *vcpu;
+	vcpu = host_ctxt->__hyp_running_vcpu;
+
+	__deactivate_traps(vcpu);
+	__sysreg_restore_host_state(host_ctxt);
+
 	panic(__hyp_panic_string,
 	      spsr,  elr,
 	      read_sysreg_el2(esr),   read_sysreg_el2(far),
 	      read_sysreg(hpfar_el2), par, vcpu);
 }
 
-static hyp_alternate_select(__hyp_call_panic,
-			    __hyp_call_panic_nvhe, __hyp_call_panic_vhe,
-			    ARM64_HAS_VIRT_HOST_EXTN);
-
 void __hyp_text __noreturn hyp_panic(struct kvm_cpu_context *host_ctxt)
 {
-	struct kvm_vcpu *vcpu = NULL;
-
 	u64 spsr = read_sysreg_el2(spsr);
 	u64 elr = read_sysreg_el2(elr);
 	u64 par = read_sysreg(par_el1);
 
-	if (read_sysreg(vttbr_el2)) {
-		vcpu = host_ctxt->__hyp_running_vcpu;
-		__timer_disable_traps(vcpu);
-		__deactivate_traps(vcpu);
-		__deactivate_vm(vcpu);
-		__sysreg_restore_host_state(host_ctxt);
-	}
-
-	/* Call panic for real */
-	__hyp_call_panic()(spsr, elr, par, vcpu);
+	if (!has_vhe())
+		__hyp_call_panic_nvhe(spsr, elr, par, host_ctxt);
+	else
+		__hyp_call_panic_vhe(spsr, elr, par, host_ctxt);
 
 	unreachable();
 }
-- 
2.14.2

  parent reply	other threads:[~2018-02-27 11:33 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-27 11:33 [PATCH v5 00/40] Optimize KVM/ARM for VHE systems Christoffer Dall
2018-02-27 11:33 ` [PATCH v5 01/40] KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN Christoffer Dall
2018-03-07 13:01   ` Marc Zyngier
2018-02-27 11:33 ` [PATCH v5 02/40] KVM: arm/arm64: Move vcpu_load call after kvm_vcpu_first_run_init Christoffer Dall
2018-02-27 11:33 ` [PATCH v5 03/40] KVM: arm64: Avoid storing the vcpu pointer on the stack Christoffer Dall
2018-03-05 11:08   ` Julien Grall
2018-02-27 11:33 ` Christoffer Dall [this message]
2018-02-27 11:33 ` [PATCH v5 05/40] KVM: arm64: Move HCR_INT_OVERRIDE to default HCR_EL2 guest flag Christoffer Dall
2018-02-27 11:33 ` [PATCH v5 06/40] KVM: arm/arm64: Get rid of vcpu->arch.irq_lines Christoffer Dall
2018-02-27 11:33 ` [PATCH v5 07/40] KVM: arm/arm64: Add kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs Christoffer Dall
2018-02-27 11:33 ` [PATCH v5 08/40] KVM: arm/arm64: Introduce vcpu_el1_is_32bit Christoffer Dall
2018-02-27 11:33 ` [PATCH v5 09/40] KVM: arm64: Move debug dirty flag calculation out of world switch Christoffer Dall
2018-02-27 11:33 ` [PATCH v5 10/40] KVM: arm64: Slightly improve debug save/restore functions Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 11/40] KVM: arm64: Improve debug register save/restore flow Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 12/40] KVM: arm64: Factor out fault info population and gic workarounds Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 13/40] KVM: arm64: Introduce VHE-specific kvm_vcpu_run Christoffer Dall
2018-02-27 13:35   ` Andrew Jones
2018-02-27 11:34 ` [PATCH v5 14/40] KVM: arm64: Remove kern_hyp_va() use in VHE switch function Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 15/40] KVM: arm64: Don't deactivate VM on VHE systems Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 16/40] KVM: arm64: Remove noop calls to timer save/restore from VHE switch Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 17/40] KVM: arm64: Move userspace system registers into separate function Christoffer Dall
2018-03-05 12:59   ` Julien Grall
2018-02-27 11:34 ` [PATCH v5 18/40] KVM: arm64: Rewrite sysreg alternatives to static keys Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 19/40] KVM: arm64: Introduce separate VHE/non-VHE sysreg save/restore functions Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 20/40] KVM: arm/arm64: Remove leftover comment from kvm_vcpu_run_vhe Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 21/40] KVM: arm64: Unify non-VHE host/guest sysreg save and restore functions Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 22/40] KVM: arm64: Don't save the host ELR_EL2 and SPSR_EL2 on VHE systems Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 23/40] KVM: arm64: Change 32-bit handling of VM system registers Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 24/40] KVM: arm64: Rewrite system register accessors to read/write functions Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 25/40] KVM: arm64: Introduce framework for accessing deferred sysregs Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 26/40] KVM: arm/arm64: Prepare to handle deferred save/restore of SPSR_EL1 Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 27/40] KVM: arm64: Prepare to handle deferred save/restore of ELR_EL1 Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 28/40] KVM: arm64: Defer saving/restoring 64-bit sysregs to vcpu load/put on VHE Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 29/40] KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 30/40] KVM: arm64: Defer saving/restoring 32-bit sysregs to vcpu load/put Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 31/40] KVM: arm64: Move common VHE/non-VHE trap config in separate functions Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 32/40] KVM: arm64: Directly call VHE and non-VHE FPSIMD enabled functions Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 33/40] KVM: arm64: Configure c15, PMU, and debug register traps on cpu load/put for VHE Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 34/40] KVM: arm64: Cleanup __activate_traps and __deactive_traps for VHE and non-VHE Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 35/40] KVM: arm/arm64: Get rid of vgic_elrsr Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 36/40] KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC code Christoffer Dall
2018-03-15 15:54   ` Julien Grall
2018-02-27 11:34 ` [PATCH v5 37/40] KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64 Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 38/40] KVM: arm/arm64: Handle VGICv3 save/restore from the main VGIC code on VHE Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 39/40] KVM: arm/arm64: Move VGIC APR save/restore to vgic put/load Christoffer Dall
2018-02-27 11:34 ` [PATCH v5 40/40] KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQs Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180227113429.637-5-cdall@kernel.org \
    --to=cdall@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).