From: jernej.skrabec@siol.net (Jernej Skrabec)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/16] drm/sun4i: Add support for variants to DW HDMI PHY
Date: Tue, 27 Feb 2018 23:26:55 +0100 [thread overview]
Message-ID: <20180227222701.9716-11-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20180227222701.9716-1-jernej.skrabec@siol.net>
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.
Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 20 ++++++--
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 89 +++++++++++++++++++++++-----------
2 files changed, 76 insertions(+), 33 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index d8d0684fc8aa..1e9eb6072615 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -12,11 +12,23 @@
#include <linux/regmap.h>
#include <linux/reset.h>
+struct sun8i_hdmi_phy;
+
+struct sun8i_hdmi_phy_variant {
+ void (*phy_init)(struct sun8i_hdmi_phy *phy);
+ void (*phy_disable)(struct dw_hdmi *hdmi,
+ struct sun8i_hdmi_phy *phy);
+ int (*phy_config)(struct dw_hdmi *hdmi,
+ struct sun8i_hdmi_phy *phy,
+ unsigned int clk_rate);
+};
+
struct sun8i_hdmi_phy {
- struct clk *clk_bus;
- struct clk *clk_mod;
- struct regmap *regs;
- struct reset_control *rst_phy;
+ struct clk *clk_bus;
+ struct clk *clk_mod;
+ struct regmap *regs;
+ struct reset_control *rst_phy;
+ struct sun8i_hdmi_phy_variant *variant;
};
struct sun8i_dw_hdmi {
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 9d2f11ca3538..17aada64bafd 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -30,21 +30,10 @@
*/
#define I2C_ADDR 0x69
-static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
- struct drm_display_mode *mode)
+static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi,
+ struct sun8i_hdmi_phy *phy,
+ unsigned int clk_rate)
{
- struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
- u32 val = 0;
-
- if (mode->flags & DRM_MODE_FLAG_NHSYNC)
- val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
-
- if (mode->flags & DRM_MODE_FLAG_NVSYNC)
- val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
-
- regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
- SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
-
regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_REXT_CTRL_REG,
SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN,
SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN);
@@ -64,21 +53,21 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
* release any documentation, explanation of this values can
* be found in i.MX 6Dual/6Quad Reference Manual.
*/
- if (mode->crtc_clock <= 27000) {
+ if (clk_rate <= 27000000) {
dw_hdmi_phy_i2c_write(hdmi, 0x01e0, 0x06);
dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x15);
dw_hdmi_phy_i2c_write(hdmi, 0x08da, 0x10);
dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
dw_hdmi_phy_i2c_write(hdmi, 0x0318, 0x0e);
dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
- } else if (mode->crtc_clock <= 74250) {
+ } else if (clk_rate <= 74250000) {
dw_hdmi_phy_i2c_write(hdmi, 0x0540, 0x06);
dw_hdmi_phy_i2c_write(hdmi, 0x0005, 0x15);
dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
dw_hdmi_phy_i2c_write(hdmi, 0x0007, 0x19);
dw_hdmi_phy_i2c_write(hdmi, 0x02b5, 0x0e);
dw_hdmi_phy_i2c_write(hdmi, 0x8009, 0x09);
- } else if (mode->crtc_clock <= 148500) {
+ } else if (clk_rate <= 148500000) {
dw_hdmi_phy_i2c_write(hdmi, 0x04a0, 0x06);
dw_hdmi_phy_i2c_write(hdmi, 0x000a, 0x15);
dw_hdmi_phy_i2c_write(hdmi, 0x0000, 0x10);
@@ -103,10 +92,27 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
return 0;
};
-static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
+ struct drm_display_mode *mode)
{
struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+ u32 val = 0;
+
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NHSYNC;
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ val |= SUN8I_HDMI_PHY_DBG_CTRL_POL_NVSYNC;
+
+ regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
+ SUN8I_HDMI_PHY_DBG_CTRL_POL_MASK, val);
+
+ return phy->variant->phy_config(hdmi, phy, mode->crtc_clock * 1000);
+};
+
+static void sun8i_hdmi_phy_disable_a83t(struct dw_hdmi *hdmi,
+ struct sun8i_hdmi_phy *phy)
+{
dw_hdmi_phy_gen2_txpwron(hdmi, 0);
dw_hdmi_phy_gen2_pddq(hdmi, 1);
@@ -114,6 +120,13 @@ static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
SUN8I_HDMI_PHY_REXT_CTRL_REXT_EN, 0);
}
+static void sun8i_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+{
+ struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
+
+ phy->variant->phy_disable(hdmi, phy);
+}
+
static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
.init = &sun8i_hdmi_phy_config,
.disable = &sun8i_hdmi_phy_disable,
@@ -122,16 +135,8 @@ static const struct dw_hdmi_phy_ops sun8i_hdmi_phy_ops = {
.setup_hpd = &dw_hdmi_phy_setup_hpd,
};
-void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+static void sun8i_hdmi_phy_init_a83t(struct sun8i_hdmi_phy *phy)
{
- /* enable read access to HDMI controller */
- regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
- SUN8I_HDMI_PHY_READ_EN_MAGIC);
-
- /* unscramble register offsets */
- regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
- SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
-
regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_DBG_CTRL_REG,
SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK,
SUN8I_HDMI_PHY_DBG_CTRL_PX_LOCK);
@@ -145,6 +150,19 @@ void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
SUN8I_HDMI_PHY_DBG_CTRL_ADDR(I2C_ADDR));
}
+void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+{
+ /* enable read access to HDMI controller */
+ regmap_write(phy->regs, SUN8I_HDMI_PHY_READ_EN_REG,
+ SUN8I_HDMI_PHY_READ_EN_MAGIC);
+
+ /* unscramble register offsets */
+ regmap_write(phy->regs, SUN8I_HDMI_PHY_UNSCRAMBLE_REG,
+ SUN8I_HDMI_PHY_UNSCRAMBLE_MAGIC);
+
+ phy->variant->phy_init(phy);
+}
+
const struct dw_hdmi_phy_ops *sun8i_hdmi_phy_get_ops(void)
{
return &sun8i_hdmi_phy_ops;
@@ -158,20 +176,31 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
.name = "phy"
};
+static const struct sun8i_hdmi_phy_variant sun8i_a83t_hdmi_phy = {
+ .phy_init = &sun8i_hdmi_phy_init_a83t,
+ .phy_disable = &sun8i_hdmi_phy_disable_a83t,
+ .phy_config = &sun8i_hdmi_phy_config_a83t,
+};
+
static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
- { .compatible = "allwinner,sun8i-a83t-hdmi-phy" },
+ {
+ .compatible = "allwinner,sun8i-a83t-hdmi-phy",
+ .data = &sun8i_a83t_hdmi_phy,
+ },
{ /* sentinel */ }
};
int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
{
+ const struct of_device_id *match;
struct device *dev = hdmi->dev;
struct sun8i_hdmi_phy *phy;
struct resource res;
void __iomem *regs;
int ret;
- if (!of_match_node(sun8i_hdmi_phy_of_table, node)) {
+ match = of_match_node(sun8i_hdmi_phy_of_table, node);
+ if (!match) {
dev_err(dev, "Incompatible HDMI PHY\n");
return -EINVAL;
}
@@ -180,6 +209,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
if (!phy)
return -ENOMEM;
+ phy->variant = (struct sun8i_hdmi_phy_variant *)match->data;
+
ret = of_address_to_resource(node, 0, &res);
if (ret) {
dev_err(dev, "phy: Couldn't get our resources\n");
--
2.16.2
next prev parent reply other threads:[~2018-02-27 22:26 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 22:26 [PATCH v2 00/16] Implement H3/H5 HDMI driver Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs Jernej Skrabec
2018-02-28 7:34 ` Maxime Ripard
2018-02-28 21:55 ` Jernej Škrabec
2018-02-27 22:26 ` [PATCH v2 02/16] clk: sunxi-ng: h3: h5: Add minimal rate for video PLL Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 03/16] clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 04/16] clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 05/16] dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it Jernej Skrabec
2018-02-28 7:36 ` Maxime Ripard
2018-02-28 21:43 ` Jernej Škrabec
2018-03-02 8:12 ` Maxime Ripard
2018-02-27 22:26 ` [PATCH v2 07/16] drm/sun4i: Add support for H3 display engine Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 08/16] drm/sun4i: Add support for H3 mixer 0 Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 09/16] drm/sun4i: Fix polarity configuration for DW HDMI PHY Jernej Skrabec
2018-02-27 22:26 ` Jernej Skrabec [this message]
2018-02-27 22:26 ` [PATCH v2 11/16] drm/sun4i: Move and expand DW HDMI PHY register macros Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 12/16] drm/sun4i: Add support for H3 HDMI PHY variant Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 13/16] drm/sun4i: Allow building on arm64 Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 14/16] ARM: dts: sunxi: h3/h5: Add HDMI pipeline Jernej Skrabec
2018-02-27 22:27 ` [PATCH v2 15/16] ARM: dts: sun8i: h3: Enable HDMI output on H3 boards Jernej Skrabec
2018-02-27 22:27 ` [PATCH v2 16/16] ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards Jernej Skrabec
2018-02-28 21:23 ` [PATCH v2 00/16] Implement H3/H5 HDMI driver Jernej Škrabec
2018-03-01 8:23 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180227222701.9716-11-jernej.skrabec@siol.net \
--to=jernej.skrabec@siol.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox