From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Thu, 1 Mar 2018 09:23:47 +0100 Subject: [PATCH v2 00/16] Implement H3/H5 HDMI driver In-Reply-To: <2235934.0TF68fluGz@jernej-laptop> References: <20180227222701.9716-1-jernej.skrabec@siol.net> <2235934.0TF68fluGz@jernej-laptop> Message-ID: <20180301082347.go4l7332kjoq5dmm@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Wed, Feb 28, 2018 at 10:23:35PM +0100, Jernej ?krabec wrote: > Dne torek, 27. februar 2018 ob 23:26:45 CET je Jernej Skrabec napisal(a): > > This series implements H3/H5 HDMI driver. It was tested on OrangePi 2 (H3), > > OrangePi Plus2e (H3) and OrangePi PC2 (H5) with many resolutions and it > > works well. Bug, which prevented correct operation for some resolutions, > > is also fixed. > > > > Code is based on linux-next, next-20180226 tag. > > Today I tried on this series on next-20180228, but resolution switching > doesn't really work. The reason for this is use of clk_set_rate_exclusive() in > sun4i_tcon1_mode_set(). If I revert it to ordinary clk_set_rate() it works ok. > I investigated a bit and it seems that clocks stays at first set even if tcon > (the owner of exclusive lock) request the new one. Example: > > [ 69.325732] TCON clk wanted: 148500000 > [ 69.325740] TCON real clk: 69272728 > [ 69.325770] HDMI clk wanted: 148500000 > [ 69.325773] HDMI real clk: 138545455 > [ 69.325815] HDMI PHY clk wanted: 148500000 > [ 69.325819] HDMI PHY real clk: 138545454 > > Is there anything I can do to help debug this? I don't recall if disable hook is called during a mode set, but if it is, you can add a call to clk_rate_exclusive_put. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: