[PATCH 00/10] updates for omap2plus_defconfig

[PATCH 00/10] updates for omap2plus_defconfig

[Tony Lindgren]

Hi all,

Here are some omap2plus_defconfig updates to fix up the options that
have changed and would get removed with make defconfig, then to drop
the unneeded options with make defconfig, and finally add some new
options.

The biggest changes naturally are the switch from omap_serial to
8250_omap, and from omapfb to omapdrm. But both have been tested for
several years now, so I think we can flip over to use them now.

And then we now enable the options needed for am335x and am437x PM.

Regards,

Tony

Tony Lindgren (10):
  ARM: omap2plus_defconfig: Update for moved options
  ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth
  ARM: omap2plus_defconfig: Select MFD_TI_LMU
  ARM: omap2plus_defconfig: Update LIRC options
  ARM: omap2plus_defconfig: Add SND_OSSEMUL
  ARM: omap2plus_defconfig: Drop unneeded options
  ARM: omap2plus_defconfig: Enable am335x and am437x PM options
  ARM: omap2plus_defconfig: Enable CEC
  ARM: omap2plus_defconfig: Switch to use omapdrm by default
  ARM: omap2plus_defconfig: Enable 8250_OMAP

 arch/arm/configs/omap2plus_defconfig | 91 ++++++++++++++++++++----------------
 1 file changed, 52 insertions(+), 39 deletions(-)

-- 
2.16.2

[PATCH 01/10] ARM: omap2plus_defconfig: Update for moved options

[Tony Lindgren]

Just move the options around to make applying patches against
omap2plus_defconfig easier after making make savedefconfig.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -71,9 +71,10 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_CPUFREQ_DT=m
-CONFIG_ARM_TI_CPUFREQ=y
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_ARM_TI_CPUFREQ=y
 CONFIG_CPU_IDLE=y
+CONFIG_KERNEL_MODE_NEON=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
@@ -314,14 +315,14 @@ CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
+CONFIG_RC_CORE=m
+CONFIG_RC_DEVICES=y
+CONFIG_IR_RX51=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_RC_CORE=m
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_LIRC=m
-CONFIG_RC_DEVICES=y
-CONFIG_IR_RX51=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
@@ -520,15 +521,6 @@ CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_KERNEL_MODE_NEON=y
 CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
@@ -536,5 +528,13 @@ CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
-- 
2.16.2

[PATCH 02/10] ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth

[Tony Lindgren]

We now have SERIAL_DEV that at least TI WLAN devices can use.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -104,9 +104,11 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_NOKIA=m
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -248,6 +250,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
-- 
2.16.2

[PATCH 02/10] ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [180301 22:18]:
> We now have SERIAL_DEV that at least TI WLAN devices can use.
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -248,6 +250,7 @@ CONFIG_SERIAL_8250_RSA=y
>  CONFIG_SERIAL_OF_PLATFORM=y
>  CONFIG_SERIAL_OMAP=y
>  CONFIG_SERIAL_OMAP_CONSOLE=y
> +CONFIG_SERIAL_DEV_BUS=m
>  CONFIG_I2C_CHARDEV=y
>  CONFIG_SPI=y
>  CONFIG_SPI_OMAP24XX=y

This we actually want to have built-in, otherwise we don't
get SERIAL_DEV_CTRL_TTYPORT. Updated patch below.

Regards,

Tony

8< -------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 1 Mar 2018 10:47:35 -0800
Subject: [PATCH] ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth

We now have SERIAL_DEV that at least TI WLAN devices can use.
We want SERIAL_DEV built-in, so we can also enable the option
for SERIAL_DEV_CTRL_TTYPORT.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -104,9 +104,11 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_NOKIA=m
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -248,6 +250,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
-- 
2.16.2

[PATCH 03/10] ARM: omap2plus_defconfig: Select MFD_TI_LMU

[Tony Lindgren]

We have REGULATOR_LM363X selected but not MFD_TI_LMU and
REGULATOR_LM363X depends on MFD_TI_LMU.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -295,6 +295,7 @@ CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
 CONFIG_MFD_CPCAP=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_MFD_TI_LMU=m
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TI_LP873X=y
-- 
2.16.2

[PATCH 04/10] ARM: omap2plus_defconfig: Update LIRC options

[Tony Lindgren]

We have LIRC selected as a loadable module but it must now be
built-in. Let's update that and add few interesting new options
for blinking IR LEDs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -320,13 +320,16 @@ CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_RC_CORE=m
+CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
+CONFIG_IR_SPI=m
 CONFIG_IR_RX51=m
+CONFIG_IR_GPIO_TX=m
+CONFIG_IR_PWM_TX=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_LIRC=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-- 
2.16.2

[PATCH 05/10] ARM: omap2plus_defconfig: Add SND_OSSEMUL

[Tony Lindgren]

We have SND_MIXER_OSS and SND_PCM_OSS but they now
depend on SND_OSSEMUL selecting SOUND_OSS_CORE.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -369,6 +369,7 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
+CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_VERBOSE_PRINTK=y
-- 
2.16.2

[PATCH 06/10] ARM: omap2plus_defconfig: Drop unneeded options

[Tony Lindgren]

These are no longer needed because:

- PCI_DRA7XX_HOST selects PCI_DRA7XX

- USB_NET_QMI_WWAN selects USB_WDM

- USB_PHY selects EXTCON

- IIO_CONFIGFS selects CONFIGFS_FS

- TIMER_STATS option no longer exists

- CRYPTO_SHA1_ARM_NEON selects CRYPTO_SHA1_ARM

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -50,7 +50,6 @@ CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_DRA7XX=y
 CONFIG_PCI_DRA7XX_EP=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
@@ -394,7 +393,6 @@ CONFIG_USB_MON=m
 CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_WDM=m
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=m
 CONFIG_USB_MUSB_HDRC=m
@@ -471,7 +469,6 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_OMAP=y
 CONFIG_TI_EDMA=y
 CONFIG_OMAP_IOMMU=y
-CONFIG_EXTCON=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_EXTCON_USB_GPIO=m
 CONFIG_TI_EMIF=m
@@ -503,7 +500,6 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
@@ -524,13 +520,11 @@ CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
-- 
2.16.2

[PATCH 07/10] ARM: omap2plus_defconfig: Enable am335x and am437x PM options

[Tony Lindgren]

These are needed to enable low-power suspend mode as described
by Dave.

Note that these depend on the am335x-pm-firmware.elf.

Cc: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -469,9 +469,16 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_OMAP=y
 CONFIG_TI_EDMA=y
 CONFIG_OMAP_IOMMU=y
+CONFIG_REMOTEPROC=m
+CONFIG_OMAP_REMOTEPROC=m
+CONFIG_WKUP_M3_RPROC=m
+CONFIG_SOC_TI=y
+CONFIG_AMX3_PM=m
+CONFIG_WKUP_M3_IPC=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_EXTCON_USB_GPIO=m
 CONFIG_TI_EMIF=m
+CONFIG_TI_EMIF_SRAM=m
 CONFIG_IIO=m
 CONFIG_IIO_SW_DEVICE=m
 CONFIG_IIO_SW_TRIGGER=m
-- 
2.16.2

[PATCH 08/10] ARM: omap2plus_defconfig: Enable CEC

[Tony Lindgren]

We have CEC support available and working so let's enable it.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -327,10 +327,12 @@ CONFIG_IR_GPIO_TX=m
 CONFIG_IR_PWM_TX=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CEC_SUPPORT=y
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
+CONFIG_CEC_PLATFORM_DRIVERS=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_TVP5150=m
 CONFIG_FB=y
-- 
2.16.2

[PATCH 09/10] ARM: omap2plus_defconfig: Switch to use omapdrm by default

[Tony Lindgren]

We've had omapdrm working for few years now so let's use it by
default.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 39 ++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -335,28 +335,30 @@ CONFIG_VIDEO_OMAP3=m
 CONFIG_CEC_PLATFORM_DRIVERS=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_TVP5150=m
+CONFIG_DRM=m
+CONFIG_DRM_OMAP=m
+CONFIG_OMAP5_DSS_HDMI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_DRM_OMAP_ENCODER_OPA362=m
+CONFIG_DRM_OMAP_ENCODER_TFP410=m
+CONFIG_DRM_OMAP_ENCODER_TPD12S015=m
+CONFIG_DRM_OMAP_CONNECTOR_DVI=m
+CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
+CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
+CONFIG_DRM_OMAP_PANEL_DPI=m
+CONFIG_DRM_OMAP_PANEL_DSI_CM=m
+CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
+CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_TILCDC=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP2=m
-CONFIG_FB_OMAP5_DSS_HDMI=y
-CONFIG_FB_OMAP2_DSS_SDI=y
-CONFIG_FB_OMAP2_DSS_DSI=y
-CONFIG_FB_OMAP2_ENCODER_TFP410=m
-CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
-CONFIG_FB_OMAP2_CONNECTOR_DVI=m
-CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
-CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
-CONFIG_FB_OMAP2_PANEL_DPI=m
-CONFIG_FB_OMAP2_PANEL_DSI_CM=m
-CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
-CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
-CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
-CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -365,7 +367,6 @@ CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_PANDORA=m
 CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
-- 
2.16.2

[PATCH 10/10] ARM: omap2plus_defconfig: Enable 8250_OMAP

[Tony Lindgren]

We've had 8250_OMAP working for few years now, so let's start enabling
it by default. We provide users an option to warn by default with
SERIAL_8250_OMAP_TTYO_FIXUP by default. That option updates the serial
console to point to 8250 driver and warns about it.

Users with ttyO[0123] in their /etc/inittab should update inittab
to use ttyS[0123] instead.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -246,6 +246,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_OMAP=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
-- 
2.16.2