From mboxrd@z Thu Jan 1 00:00:00 1970 From: miquel.raynal@bootlin.com (Miquel Raynal) Date: Fri, 2 Mar 2018 18:03:13 +0100 Subject: [PATCH 05/52] mtd: rawnand: brcmnand: convert driver to nand_scan() In-Reply-To: <20180302170400.6712-1-miquel.raynal@bootlin.com> References: <20180302170400.6712-1-miquel.raynal@bootlin.com> Message-ID: <20180302170400.6712-6-miquel.raynal@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal --- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 43 ++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index 844c84987f49..4ba240f8662a 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -2208,6 +2208,28 @@ static int brcmnand_setup_dev(struct brcmnand_host *host) return 0; } +static int brcmnand_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct brcmnand_host *host = nand_get_controller_data(chip); + int ret; + + if (chip->bbt_options & NAND_BBT_USE_FLASH) + chip->bbt_options |= NAND_BBT_NO_OOB; + + if (brcmnand_setup_dev(host)) + return -ENXIO; + + chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512; + + /* only use our internal HW threshold */ + mtd->bitflip_threshold = 1; + + ret = brcmstb_choose_ecc_layout(host); + + return ret; +} + static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) { struct brcmnand_controller *ctrl = host->ctrl; @@ -2267,10 +2289,6 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) nand_writereg(ctrl, cfg_offs, nand_readreg(ctrl, cfg_offs) & ~CFG_BUS_WIDTH); - ret = nand_scan_ident(mtd, 1, NULL); - if (ret) - return ret; - chip->options |= NAND_NO_SUBPAGE_WRITE; /* * Avoid (for instance) kmap()'d buffers from JFFS2, which we can't DMA @@ -2279,21 +2297,8 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) */ chip->options |= NAND_USE_BOUNCE_BUFFER; - if (chip->bbt_options & NAND_BBT_USE_FLASH) - chip->bbt_options |= NAND_BBT_NO_OOB; - - if (brcmnand_setup_dev(host)) - return -ENXIO; - - chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512; - /* only use our internal HW threshold */ - mtd->bitflip_threshold = 1; - - ret = brcmstb_choose_ecc_layout(host); - if (ret) - return ret; - - ret = nand_scan_tail(mtd); + chip->ecc.attach_chip = brcmnand_attach_chip; + ret = nand_scan(mtd, 1); if (ret) return ret; -- 2.14.1