[PATCHv2 4/7] dt-bindings: fpga: add Stratix10 SoC FPGA manager binding

[robh@kernel.org (Rob Herring)]

On Thu, Mar 01, 2018 at 06:19:32PM -0600, richard.gong at linux.intel.com wrote:
> From: Alan Tull <atull@kernel.org>
> 
> Add a Device Tree binding for the Intel Stratix10 SoC FPGA manager.
> 
> Signed-off-by: Alan Tull <atull@kernel.org>
> ---
> v2: this patch is added in patch set version 2
> ---
>  .../devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt  | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
> new file mode 100644
> index 0000000..78de689
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
> @@ -0,0 +1,10 @@
> +Intel Stratix10 SoC FPGA Manager
> +
> +Required properties:
> +- compatible : should contain "intel,stratix10-soc-fpga-mgr"
> +
> +Example:
> +
> +	fpga_mgr: fpga-mgr at 0 {
> +		compatible = "intel,stratix10-soc-fpga-mgr";

No reg or anything else? Is that because it all goes thru the service 
layer firmware? Just get the service layer driver to instantiate a 
device for this driver or get rid of the 2 layers if that's all the 
firmware interface does. DT is not a Linux driver instantiation 
mechanism.

And build your dts files with "W=1" because there's an error in this 
example.

Rob