[PATCH v2] mtd: nand: marvell: Fix clock resource by adding a register clock

[boris.brezillon@bootlin.com (Boris Brezillon)]

On Mon, 12 Mar 2018 17:55:26 +0100
Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> >  
> >>  	struct completion complete;
> >>  	unsigned long assigned_cs;
> >>  	struct list_head chips;
> >> @@ -2747,12 +2748,24 @@ static int marvell_nfc_probe(struct platform_device *pdev)
> >>  	if (ret)
> >>  		return ret;
> >>  
> >> +	nfc->reg_clk = devm_clk_get(&pdev->dev, "reg");
> >> +	if (PTR_ERR(nfc->reg_clk) != -ENOENT) {
> >> +		if (!IS_ERR(nfc->reg_clk)) {
> >> +			ret = clk_prepare_enable(nfc->reg_clk);
> >> +			if (ret)
> >> +				goto unprepare_clk;  
> >
> > I already suggested to move the devm_clk_get(&pdev->dev, "reg") before
> > the clk_prepare_enable(nfc->ecc_clk) one to simplify the error path.
> >  
> 
> Actually I started to implement your suggestion but unlike what you
> though it made the code less simpler. Indeed by having the mandatory
> clock first than in case of failure we can directly exit the function.
> 
> If the reg clock was initialized first, then if the core/ecc clock fail
> in soem case we woudl need to daisbel the reg clock and in other case we
> could directly exit.

Well, it's pretty much the same problem if you do it in the order you
propose here: if the core clk enable fails, you'll have to disable the
reg clk. Plus, I'm not a big fan of if/else block imbrications when we
can avoid them.

> 
> 
> >> +		} else {
> >> +			ret = PTR_ERR(nfc->reg_clk);
> >> +			goto unprepare_clk;
> >> +		}
> >> +	}  
> >
> > So nfc->reg_clk stays assigned to -ENOENT if the clk is not present, and
> > clk_disable_unprepare() will manipulate an invalid pointer when called
> > from the error or ->remove() path.  
> 
> I think you missed the fact that the clk_disable_unprepare() function
> managed the invalid pointer, have a look on the functions and you will
> see that IS_ERR() is used, so there is no point to set the pointer to NULL.

Right. I just checked the clk_prepare() implementation which is
checking for NULL value only and I thought clk_disable() and
clk_unprepare() were doing the same, which apparently is not the case.


-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com