From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@bootlin.com (Gregory CLEMENT) Date: Tue, 13 Mar 2018 11:30:16 +0100 Subject: [PATCH v3] mtd: nand: marvell: Fix clock resource by adding a register clock Message-ID: <20180313103016.7695-1-gregory.clement@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updated accordingly. Signed-off-by: Gregory CLEMENT --- Changelog: v2 -> v3 - Updating the kerneldoc - Renaming unprepare_clk to unprepare_ecc_clk - Adding extra test on the presence of "core" clock to make Boris happy v1 -> v2 - Removed the unnecessary IS_ERR() call - Skip the reg clock only if it is not present by checking "-ENOENT" - Add a label for uninitializing the reg clock. .../devicetree/bindings/mtd/marvell-nand.txt | 6 +++- drivers/mtd/nand/marvell_nand.c | 34 ++++++++++++++++++---- 2 files changed, 33 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt index c08fb477b3c6..4ee9813bf88f 100644 --- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt +++ b/Documentation/devicetree/bindings/mtd/marvell-nand.txt @@ -14,7 +14,11 @@ Required properties: - #address-cells: shall be set to 1. Encode the NAND CS. - #size-cells: shall be set to 0. - interrupts: shall define the NAND controller interrupt. -- clocks: shall reference the NAND controller clock. +- clocks: shall reference the NAND controller clocks, the second one is + optional but needed for the Armada 7K/8K SoCs +- clock-names: mandatory if there is a second clock, in this case the + name must be "core" for the first clock and "reg" for the second + one - marvell,system-controller: Set to retrieve the syscon node that handles NAND controller related registers (only required with the "marvell,armada-8k-nand[-controller]" compatibles). diff --git a/drivers/mtd/nand/marvell_nand.c b/drivers/mtd/nand/marvell_nand.c index 2196f2a233d6..0e7e8017046a 100644 --- a/drivers/mtd/nand/marvell_nand.c +++ b/drivers/mtd/nand/marvell_nand.c @@ -308,6 +308,7 @@ struct marvell_nfc_caps { * @dev: Parent device (used to print error messages) * @regs: NAND controller registers * @ecc_clk: ECC block clock, two times the NAND controller clock + * @reg_clk: Regsiters clock * @complete: Completion object to wait for NAND controller events * @assigned_cs: Bitmask describing already assigned CS lines * @chips: List containing all the NAND chips attached to @@ -321,6 +322,7 @@ struct marvell_nfc { struct device *dev; void __iomem *regs; struct clk *ecc_clk; + struct clk *reg_clk; struct completion complete; unsigned long assigned_cs; struct list_head chips; @@ -2739,7 +2741,12 @@ static int marvell_nfc_probe(struct platform_device *pdev) return irq; } - nfc->ecc_clk = devm_clk_get(&pdev->dev, NULL); + nfc->ecc_clk = devm_clk_get(&pdev->dev, "core"); + + /* Managed the legacy case (when the first clock was not named) */ + if (nfc->ecc_clk == ERR_PTR(-ENOENT)) + nfc->ecc_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(nfc->ecc_clk)) return PTR_ERR(nfc->ecc_clk); @@ -2747,12 +2754,24 @@ static int marvell_nfc_probe(struct platform_device *pdev) if (ret) return ret; + nfc->reg_clk = devm_clk_get(&pdev->dev, "reg"); + if (PTR_ERR(nfc->reg_clk) != -ENOENT) { + if (!IS_ERR(nfc->reg_clk)) { + ret = clk_prepare_enable(nfc->reg_clk); + if (ret) + goto unprepare_ecc_clk; + } else { + ret = PTR_ERR(nfc->reg_clk); + goto unprepare_ecc_clk; + } + } + marvell_nfc_disable_int(nfc, NDCR_ALL_INT); marvell_nfc_clear_int(nfc, NDCR_ALL_INT); ret = devm_request_irq(dev, irq, marvell_nfc_isr, 0, "marvell-nfc", nfc); if (ret) - goto unprepare_clk; + goto unprepare_reg_clk; /* Get NAND controller capabilities */ if (pdev->id_entry) @@ -2763,23 +2782,25 @@ static int marvell_nfc_probe(struct platform_device *pdev) if (!nfc->caps) { dev_err(dev, "Could not retrieve NFC caps\n"); ret = -EINVAL; - goto unprepare_clk; + goto unprepare_reg_clk; } /* Init the controller and then probe the chips */ ret = marvell_nfc_init(nfc); if (ret) - goto unprepare_clk; + goto unprepare_reg_clk; platform_set_drvdata(pdev, nfc); ret = marvell_nand_chips_init(dev, nfc); if (ret) - goto unprepare_clk; + goto unprepare_reg_clk; return 0; -unprepare_clk: +unprepare_reg_clk: + clk_disable_unprepare(nfc->reg_clk); +unprepare_ecc_clk: clk_disable_unprepare(nfc->ecc_clk); return ret; @@ -2796,6 +2817,7 @@ static int marvell_nfc_remove(struct platform_device *pdev) dma_release_channel(nfc->dma_chan); } + clk_disable_unprepare(nfc->reg_clk); clk_disable_unprepare(nfc->ecc_clk); return 0; -- 2.16.1