public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: andre.przywara@arm.com (Andre Przywara)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/4] dts: sunxi: A64: Add PWM controllers
Date: Sun, 18 Mar 2018 23:28:47 +0000	[thread overview]
Message-ID: <20180318232847.14278-5-andre.przywara@arm.com> (raw)
In-Reply-To: <20180318232847.14278-1-andre.przywara@arm.com>

The Allwinner A64 SoC features two PWM controllers, which are fully
compatible to the one used in the A13 and H3 chips.
Add the respective device nodes (one for the "normal" PWM, the other for
the one in the CPUS domain) and the pin their output is connected to.
On the A64 the "normal" PWM is muxed together with one of the MDIO pins
used to communicate with the Ethernet PHY, so it won't be usable on many
boards. But the Pinebook laptop uses this pin for controlling the LCD
backlight.
The CPUS PWM pin however is routed to the "RPi2" header, at the same
location as the PWM pin on the RaspberryPi.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 +++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d783d164b9c3..fda1783b1c86 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -321,6 +321,11 @@
 				bias-pull-up;
 			};
 
+			pwm_pin: pwm_pin {
+				pins = "PD22";
+				function = "pwm";
+			};
+
 			rmii_pins: rmii_pins {
 				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
 				       "PD18", "PD19", "PD20", "PD22", "PD23";
@@ -537,6 +542,15 @@
 			#interrupt-cells = <3>;
 		};
 
+		pwm: pwm at 1c21400 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		rtc: rtc at 1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
@@ -563,6 +577,15 @@
 			#reset-cells = <1>;
 		};
 
+		r_pwm: pwm at 1f03800 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01f03800 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl at 1f02c00 {
 			compatible = "allwinner,sun50i-a64-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -578,6 +601,11 @@
 				pins = "PL0", "PL1";
 				function = "s_rsb";
 			};
+
+			r_pwm_pin: pwm {
+				pins = "PL10";
+				function = "s_pwm";
+			};
 		};
 
 		r_rsb: rsb at 1f03400 {
-- 
2.14.1

  parent reply	other threads:[~2018-03-18 23:28 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-18 23:28 [PATCH v2 0/4] drivers: pwm: sun4i: Improve support for A64 SoCs Andre Przywara
2018-03-18 23:28 ` [PATCH v2 1/4] pwm: sun4i: drop unused .has_rdy member Andre Przywara
2018-03-18 23:28 ` [PATCH v2 2/4] pwm: sun4i: simplify controller mapping Andre Przywara
2018-03-18 23:28 ` [PATCH v2 3/4] dt-bindings: pwm: sunxi: add new compatible strings Andre Przywara
2018-03-19 13:43   ` Maxime Ripard
2018-03-26 22:23   ` Rob Herring
2018-03-18 23:28 ` Andre Przywara [this message]
2018-03-19  0:04   ` [linux-sunxi] [PATCH v2 4/4] dts: sunxi: A64: Add PWM controllers Stefan Brüns
2018-03-19 18:15   ` [v2,4/4] " Harald Geyer
2018-03-27 23:14 ` [PATCH v2 0/4] drivers: pwm: sun4i: Improve support for A64 SoCs Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180318232847.14278-5-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox