From mboxrd@z Thu Jan 1 00:00:00 1970 From: viresh.kumar@linaro.org (Viresh Kumar) Date: Tue, 20 Mar 2018 09:43:18 +0800 Subject: [PATCH 07/10] ARM: dts: gemini: Remove "cooling-{min|max}-level" for gpio-fan node In-Reply-To: <20180312043533.GU6842@vireshk-i7> References: <01ddf0ac8962feb63e8871a2c2c3498c763f649b.1518166039.git.viresh.kumar@linaro.org> <20180312043533.GU6842@vireshk-i7> Message-ID: <20180320014318.g7koh7ld3seucg4c@vireshk-mac-ubuntu> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 12-03-18, 10:05, Viresh Kumar wrote: > On 09-02-18, 14:28, Viresh Kumar wrote: > > The "cooling-min-level" and "cooling-max-level" properties are not > > parsed by any part of the kernel currently and the max cooling state of > > gpio-fan cooling device is found by referring to the > > "gpio-fan,speed-map" instead. > > > > Remove the unused properties from the gpio-fan node. > > > > Signed-off-by: Viresh Kumar > > --- > > arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 -- > > 1 file changed, 2 deletions(-) > > > > diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts > > index 08568ce24d06..727d16eb02d9 100644 > > --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts > > +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts > > @@ -78,8 +78,6 @@ > > gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, > > <&gpio0 12 GPIO_ACTIVE_HIGH>; > > gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>; > > - cooling-min-level = <0>; > > - cooling-max-level = <2>; > > #cooling-cells = <2>; > > }; > > > > @Linus: Can you please pick this one for 4.17 ? @Arnd/Olof: Can you please pick this one up as well ? -- viresh