From mboxrd@z Thu Jan 1 00:00:00 1970 From: pavel@ucw.cz (Pavel Machek) Date: Wed, 21 Mar 2018 21:31:37 +0100 Subject: 4.16-rc5 on Motorola Droid 4 In-Reply-To: <20180320170029.rv3u5wlvqxfl7z2v@earth.universe> References: <20180318220418.GA22880@amd> <20180320140322.GU5799@atomide.com> <20180320170029.rv3u5wlvqxfl7z2v@earth.universe> Message-ID: <20180321203137.GA23637@amd> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi! > > Maybe get somebody to help you locally with the debug cable > > soldering? :) > > I suppose people from your hackerspace can help you. It's really > easy to do. Soldering can be avoided btw. You can just use a pair > of scissors to cut a USB -> Micro USB cable and use a knife to remove > isolation. Then screw each of the 4 wires into a terminal strip. > There are USB-TTL adapters available, that have an attached cable. > If you also cut the connector from such a cable and connect it to > the other side of the terminal strip you are done. No soldering > involved ;) Hm. How big no-no is connecting USB-TTL adapter to D+/D- pins? Because that's what I could do "easily" and seems to work ;-). Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: