linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: bjorn.andersson@linaro.org (Bjorn Andersson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board
Date: Tue, 27 Mar 2018 10:49:13 -0700	[thread overview]
Message-ID: <20180327174913.GP1403@tuxbook-pro> (raw)
In-Reply-To: <1521800336-19266-14-git-send-email-sricharan@codeaurora.org>

On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote:

> Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> index 6a838b5..dbca7ec 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -21,6 +21,7 @@
>  
>  	aliases {
>  		serial0 = &blsp1_uart5;
> +		serial1 = &serial_blsp2;
>  	};
>  
>  	chosen {
> @@ -41,6 +42,47 @@
>  					bias-disable;
>  				};
>  			};
> +
> +			 i2c_0_pins: i2c_0_pinmux {
> +				  mux {
> +					   pins = "gpio42", "gpio43";
> +					   function = "blsp1_i2c";
> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			 };
> +
> +			 spi_0_pins: spi_0_pins {
> +				  mux {
> +					   pins = "gpio38", "gpio39", "gpio40", "gpio41";
> +					   function = "blsp0_spi";
> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			 };
> +
> +			 hsuart_pins: hsuart_pins {
> +				  mux {
> +					   pins = "gpio46", "gpio47", "gpio48", "gpio49";
> +					   function = "blsp2_uart";
> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			 };
> +
> +			 qpic_pins: qpic_pins {
> +				mux {
> +					   pins = "gpio1", "gpio3", "gpio4",
> +						  "gpio5", "gpio6", "gpio7",
> +						  "gpio8", "gpio10", "gpio11",
> +						  "gpio12", "gpio13", "gpio14",
> +						  "gpio15", "gpio16", "gpio17";
> +					   function = "qpic";

I would prefer that you move the pinmux part to the same dtsi that
defines the nand and add the board specific pinconf (electrical
properties) here. That way we limit the repetition between the board
files.

> +					   drive-strength = <8>;
> +					   bias-disable;
> +				  };
> +			};
> +
>  		};
>  

Other than that,

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

  reply	other threads:[~2018-03-27 17:49 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-23 10:18 [PATCH v5 00/13] ARM: dts: ipq: updates to enable a few peripherals Sricharan R
2018-03-23 10:18 ` [PATCH v5 01/13] firmware: qcom: scm: Add ipq4019 soc compatible Sricharan R
2018-03-27 16:56   ` Bjorn Andersson
2018-03-23 10:18 ` [PATCH v5 02/13] ARM: dts: ipq4019: Add a default chosen node Sricharan R
2018-03-27 16:56   ` Bjorn Andersson
2018-03-23 10:18 ` [PATCH v5 03/13] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R
2018-03-27 16:50   ` Bjorn Andersson
2018-04-02  5:27     ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 04/13] ARM: dts: ipq4019: Change the max opp frequency Sricharan R
2018-03-23 10:18 ` [PATCH v5 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R
2018-03-27 17:04   ` Bjorn Andersson
2018-04-02  5:28     ` Sricharan R
2018-04-18  6:59   ` [v5,05/13] " Sven Eckelmann
2018-04-18  7:07     ` Sven Eckelmann
2018-04-18  7:15       ` Sricharan R
2018-04-18  7:38         ` Sven Eckelmann
2018-04-18  8:39           ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 06/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R
2018-03-27 17:12   ` Bjorn Andersson
2018-04-02  5:34     ` Sricharan R
2018-04-02  6:30   ` Varadarajan Narayanan
2018-03-23 10:18 ` [PATCH v5 07/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R
2018-03-27 17:14   ` Bjorn Andersson
2018-04-02  6:07     ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data Sricharan R
2018-03-27 17:20   ` Bjorn Andersson
2018-04-02  6:09     ` Sricharan R
2018-04-18  6:59   ` [v5,08/13] " Sven Eckelmann
2018-04-18  7:12     ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Sricharan R
2018-03-27 17:22   ` Bjorn Andersson
2018-04-02  6:10     ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 10/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R
2018-03-27 17:29   ` Bjorn Andersson
2018-04-02  6:12     ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 11/13] ARM: dts: ipq8074: Add peripheral nodes Sricharan R
2018-03-27 17:45   ` Bjorn Andersson
2018-04-02  6:34     ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 12/13] ARM: dts: ipq8074: Add pcie nodes Sricharan R
2018-03-27 17:46   ` Bjorn Andersson
2018-04-02  6:35     ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board Sricharan R
2018-03-27 17:49   ` Bjorn Andersson [this message]
2018-04-02  6:36     ` Sricharan R
2018-03-24  2:17 ` [PATCH v5 00/13] ARM: dts: ipq: updates to enable a few peripherals Richard Cochran
2018-03-24  6:12   ` sricharan at codeaurora.org
2018-03-24 17:16     ` Richard Cochran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180327174913.GP1403@tuxbook-pro \
    --to=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).