From: ssuloev@orpaltech.com (Sergey Suloev)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] spi: sun4i: introduce register set/unset helpers
Date: Thu, 29 Mar 2018 21:59:06 +0300 [thread overview]
Message-ID: <20180329185907.27281-6-ssuloev@orpaltech.com> (raw)
In-Reply-To: <20180329185907.27281-1-ssuloev@orpaltech.com>
Two helper functions were added in order to update
registers easily.
Signed-off-by: Sergey Suloev <ssuloev@orpaltech.com>
---
drivers/spi/spi-sun4i.c | 40 +++++++++++++++++++---------------------
1 file changed, 19 insertions(+), 21 deletions(-)
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index 4f24e12..fc913d4 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -107,29 +107,29 @@ static inline void sun4i_spi_write(struct sun4i_spi *sspi, u32 reg, u32 value)
writel(value, sspi->base_addr + reg);
}
-static inline u32 sun4i_spi_get_tx_fifo_count(struct sun4i_spi *sspi)
+static inline void sun4i_spi_set(struct sun4i_spi *sspi, u32 addr, u32 val)
{
- u32 reg = sun4i_spi_read(sspi, SUN4I_FIFO_STA_REG);
-
- reg >>= SUN4I_FIFO_STA_TF_CNT_BITS;
+ u32 reg = sun4i_spi_read(sspi, addr);
- return reg & SUN4I_FIFO_STA_TF_CNT_MASK;
+ reg |= val;
+ sun4i_spi_write(sspi, addr, reg);
}
-static inline void sun4i_spi_enable_interrupt(struct sun4i_spi *sspi, u32 mask)
+static inline void sun4i_spi_unset(struct sun4i_spi *sspi, u32 addr, u32 val)
{
- u32 reg = sun4i_spi_read(sspi, SUN4I_INT_CTL_REG);
+ u32 reg = sun4i_spi_read(sspi, addr);
- reg |= mask;
- sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, reg);
+ reg &= ~val;
+ sun4i_spi_write(sspi, addr, reg);
}
-static inline void sun4i_spi_disable_interrupt(struct sun4i_spi *sspi, u32 mask)
+static inline u32 sun4i_spi_get_tx_fifo_count(struct sun4i_spi *sspi)
{
- u32 reg = sun4i_spi_read(sspi, SUN4I_INT_CTL_REG);
+ u32 reg = sun4i_spi_read(sspi, SUN4I_FIFO_STA_REG);
- reg &= ~mask;
- sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, reg);
+ reg >>= SUN4I_FIFO_STA_TF_CNT_BITS;
+
+ return reg & SUN4I_FIFO_STA_TF_CNT_MASK;
}
static inline void sun4i_spi_drain_fifo(struct sun4i_spi *sspi, int len)
@@ -256,13 +256,12 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
/* Clear pending interrupts */
sun4i_spi_write(sspi, SUN4I_INT_STA_REG, ~0);
+ /* Reset FIFOs */
+ sun4i_spi_set(sspi, SUN4I_CTL_REG,
+ SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST);
reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
- /* Reset FIFOs */
- sun4i_spi_write(sspi, SUN4I_CTL_REG,
- reg | SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST);
-
/*
* Setup the transfer control register: Chip Select,
* polarities, etc.
@@ -341,12 +340,11 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
*/
sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
- /* Enable the transfer complete interrupt */
- sun4i_spi_enable_interrupt(sspi, SUN4I_INT_CTL_TC);
+ /* Enable transfer complete interrupt */
+ sun4i_spi_set(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
/* Start the transfer */
- reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
- sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
+ sun4i_spi_set(sspi, SUN4I_CTL_REG, SUN4I_CTL_XCH);
ret = sun4i_spi_wait_for_transfer(spi, tfr);
--
2.16.2
next prev parent reply other threads:[~2018-03-29 18:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-29 18:59 [PATCH 0/6] spi: Add support for DMA transfers in sun4i SPI driver Sergey Suloev
2018-03-29 18:59 ` [PATCH 1/6] spi: core: handle timeout error from transfer_one() Sergey Suloev
2018-03-29 18:59 ` [PATCH 2/6] spi: sun4i: restrict transfer length in PIO-mode Sergey Suloev
2018-04-03 8:10 ` Maxime Ripard
2018-04-03 10:26 ` Sergey Suloev
2018-04-03 11:08 ` Sergey Suloev
2018-04-03 11:40 ` Maxime Ripard
2018-04-03 12:12 ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 3/6] spi: sun4i: coding style/readability improvements Sergey Suloev
2018-03-29 18:59 ` [PATCH 4/6] spi: sun4i: use completion provided by SPI core driver Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev [this message]
2018-04-03 8:14 ` [PATCH 5/6] spi: sun4i: introduce register set/unset helpers Maxime Ripard
2018-04-03 10:27 ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 6/6] spi: sun4i: add DMA transfers support Sergey Suloev
2018-04-03 8:17 ` Maxime Ripard
2018-04-03 13:03 ` Sergey Suloev
2018-04-04 6:27 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180329185907.27281-6-ssuloev@orpaltech.com \
--to=ssuloev@orpaltech.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).