[PATCH 6/6] spi: sun4i: add DMA transfers support

[maxime.ripard@bootlin.com (Maxime Ripard)]

On Thu, Mar 29, 2018 at 09:59:07PM +0300, Sergey Suloev wrote:
> +static int sun4i_spi_dma_setup(struct device *dev,
> +			       struct resource *res)
> +{
> +	struct spi_master *master = dev_get_drvdata(dev);
> +	struct dma_slave_config dma_sconf;
> +	int ret;
> +
> +	master->dma_tx = dma_request_slave_channel_reason(dev, "tx");
> +	if (IS_ERR(master->dma_tx)) {
> +		dev_err(dev, "Unable to acquire DMA TX channel\n");
> +		ret = PTR_ERR(master->dma_tx);
> +		goto out;
> +	}
> +
> +	dma_sconf.direction = DMA_MEM_TO_DEV;
> +	dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> +	dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;

I guess that would depend on the size of the transfer, right?

> +	dma_sconf.dst_addr = res->start + SUN4I_TXDATA_REG;
> +	dma_sconf.dst_maxburst = 1;
> +	dma_sconf.src_maxburst = 1;

And a burst of 1 seems sub-optimal here.

> +	ret = sun4i_spi_dma_setup(&pdev->dev, res);
> +	if (ret) {
> +		if (ret == -EPROBE_DEFER) {
> +			/* wait for the dma driver to load */
> +			goto err_free_master;
> +		}
> +		dev_warn(&pdev->dev, "DMA transfer not supported\n");

Saying why it's not supported would be great.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180403/e3cb651f/attachment.sig>