linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: thomas.petazzoni@bootlin.com (Thomas Petazzoni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] PCI: aardvark: Fix logic in advk_pcie_{rd,wr}_conf()
Date: Fri,  6 Apr 2018 16:55:31 +0200	[thread overview]
Message-ID: <20180406145536.19637-2-thomas.petazzoni@bootlin.com> (raw)
In-Reply-To: <20180406145536.19637-1-thomas.petazzoni@bootlin.com>

From: Victor Gu <xigu@marvell.com>

The PCI configuration space read/write functions were special casing
the situation where PCI_SLOT(devfn) != 0, and returned
PCIBIOS_DEVICE_NOT_FOUND in this case.

However, while this is what is intended for the root bus, it is not
intended for the child busses, as it prevents discovering devices with
PCI_SLOT(x) != 0. Therefore, we return PCIBIOS_DEVICE_NOT_FOUND only
if we're on the root bus.

Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Wilson Ding <dingwei@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
Changes since v3:
 - Change to no longer depend on the introduction of
   advk_pcie_valid_device(), which we do not want to push to stable.
Changes since v2:
 - The logic has been factorized into a advk_pcie_valid_device()
   helper in a previous patch, so this patch was adjusted accordingly.
---
 drivers/pci/host/pci-aardvark.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index b04d37b3c5de..b72f15c99793 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -437,7 +437,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 	u32 reg;
 	int ret;
 
-	if (PCI_SLOT(devfn) != 0) {
+	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
@@ -491,7 +491,7 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 	int offset;
 	int ret;
 
-	if (PCI_SLOT(devfn) != 0)
+	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (where % size)
-- 
2.14.3

  reply	other threads:[~2018-04-06 14:55 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-06 14:55 [PATCH v4 0/6] PCI: aardvark: misc fixes and improvements Thomas Petazzoni
2018-04-06 14:55 ` Thomas Petazzoni [this message]
2018-04-06 14:55 ` [PATCH v4 2/6] PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf() Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 3/6] PCI: aardvark: Use ISR1 instead of ISR0 interrupt in legacy irq mode Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 4/6] PCI: aardvark: Fix PCIe Max Read Request Size setting Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 5/6] PCI: aardvark: Introduce an advk_pcie_valid_device() helper Thomas Petazzoni
2018-06-27 16:51   ` Lorenzo Pieralisi
2018-06-27 17:18     ` Lorenzo Pieralisi
2018-06-27 18:52       ` Thomas Petazzoni
2018-04-06 14:55 ` [PATCH v4 6/6] PCI: aardvark: Remove PCIe outbound window configuration Thomas Petazzoni
2018-04-09 16:23 ` [PATCH v4 0/6] PCI: aardvark: misc fixes and improvements Lorenzo Pieralisi
2018-04-09 18:54   ` Thomas Petazzoni
2018-04-18 13:02     ` Lorenzo Pieralisi
2018-04-18 13:49       ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180406145536.19637-2-thomas.petazzoni@bootlin.com \
    --to=thomas.petazzoni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).