[RFC PATCH v2 2/3] KVM: arm64: Convert lazy FPSIMD context switch trap to C

[cdall@kernel.org (Christoffer Dall)]

On Fri, Apr 06, 2018 at 04:51:53PM +0100, Dave Martin wrote:
> On Fri, Apr 06, 2018 at 04:25:57PM +0100, Marc Zyngier wrote:
> > Hi Dave,
> > 
> > On 06/04/18 16:01, Dave Martin wrote:
> > > To make the lazy FPSIMD context switch trap code easier to hack on,
> > > this patch converts it to C.
> > > 
> > > This is not amazingly efficient, but the trap should typically only
> > > be taken once per host context switch.
> > > 
> > > Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> > > 
> > > ---
> > > 
> > > Since RFCv1:
> > > 
> > >  * Fix indentation to be consistent with the rest of the file.
> > >  * Add missing ! to write back to sp with attempting to push regs.
> > > ---
> > >  arch/arm64/kvm/hyp/entry.S  | 57 +++++++++++++++++----------------------------
> > >  arch/arm64/kvm/hyp/switch.c | 24 +++++++++++++++++++
> > >  2 files changed, 46 insertions(+), 35 deletions(-)
> > > 
> > > diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
> > > index fdd1068..47c6a78 100644
> > > --- a/arch/arm64/kvm/hyp/entry.S
> > > +++ b/arch/arm64/kvm/hyp/entry.S
> > > @@ -176,41 +176,28 @@ ENTRY(__fpsimd_guest_restore)
> > >  	// x1: vcpu
> > >  	// x2-x29,lr: vcpu regs
> > >  	// vcpu x0-x1 on the stack
> > > -	stp	x2, x3, [sp, #-16]!
> > > -	stp	x4, lr, [sp, #-16]!
> > > -
> > > -alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
> > > -	mrs	x2, cptr_el2
> > > -	bic	x2, x2, #CPTR_EL2_TFP
> > > -	msr	cptr_el2, x2
> > > -alternative_else
> > > -	mrs	x2, cpacr_el1
> > > -	orr	x2, x2, #CPACR_EL1_FPEN
> > > -	msr	cpacr_el1, x2
> > > -alternative_endif
> > > -	isb
> > > -
> > > -	mov	x3, x1
> > > -
> > > -	ldr	x0, [x3, #VCPU_HOST_CONTEXT]
> > > -	kern_hyp_va x0
> > > -	add	x0, x0, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
> > > -	bl	__fpsimd_save_state
> > > -
> > > -	add	x2, x3, #VCPU_CONTEXT
> > > -	add	x0, x2, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
> > > -	bl	__fpsimd_restore_state
> > > -
> > > -	// Skip restoring fpexc32 for AArch64 guests
> > > -	mrs	x1, hcr_el2
> > > -	tbnz	x1, #HCR_RW_SHIFT, 1f
> > > -	ldr	x4, [x3, #VCPU_FPEXC32_EL2]
> > > -	msr	fpexc32_el2, x4
> > > -1:
> > > -	ldp	x4, lr, [sp], #16
> > > -	ldp	x2, x3, [sp], #16
> > > -	ldp	x0, x1, [sp], #16
> > > -
> > > +	stp	x2, x3, [sp, #-144]!
> > > +	stp	x4, x5, [sp, #16]
> > > +	stp	x6, x7, [sp, #32]
> > > +	stp	x8, x9, [sp, #48]
> > > +	stp	x10, x11, [sp, #64]
> > > +	stp	x12, x13, [sp, #80]
> > > +	stp	x14, x15, [sp, #96]
> > > +	stp	x16, x17, [sp, #112]
> > > +	stp	x18, lr, [sp, #128]
> > > +
> > > +	bl	__hyp_switch_fpsimd
> > > +
> > > +	ldp	x4, x5, [sp, #16]
> > > +	ldp	x6, x7, [sp, #32]
> > > +	ldp	x8, x9, [sp, #48]
> > > +	ldp	x10, x11, [sp, #64]
> > > +	ldp	x12, x13, [sp, #80]
> > > +	ldp	x14, x15, [sp, #96]
> > > +	ldp	x16, x17, [sp, #112]
> > > +	ldp	x18, lr, [sp, #128]
> > > +	ldp	x0, x1, [sp, #144]
> > > +	ldp	x2, x3, [sp], #160
> > 
> > I can't say I'm overly thrilled with adding another save/restore 
> > sequence. How about treating it like a real guest exit instead? Granted, 
> > there is a bit more overhead to it, but as you pointed out above, this 
> > should be pretty rare...
> 
> I have no objection to handling this after exiting back to
> __kvm_vcpu_run(), provided the performance is deemed acceptable.
> 

My guess is that it's going to be visible on non-VHE systems, and given
that we're doing all of this for performance in the first place, I'm not
exceited about that approach either.

I thought it was acceptable to do another save/restore, because it was
only the GPRs (and equivalent to what the compiler would generate for a
function call?) and thus not susceptible to the complexities of sysreg
save/restores.

Another alternative would be to go back to Dave's original approach of
implementing the fpsimd state update to the host's structure in assembly
directly, but I was having a hard time understanding that.  Perhaps I
just need to try harder.

Thoughts?

Thanks,
-Christoffer