From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/7] ARM: dts: sunxi: Support ALL-H3-CC H2+/H5 variants
Date: Tue, 24 Apr 2018 19:34:17 +0800 [thread overview]
Message-ID: <20180424113424.13196-1-wens@csie.org> (raw)
Hi,
This series is adds support for the H2+ and H5 variants of the Libre
Computer Project ALL-H3-CC board. The board uses the same board design
with the H2+, H3, and H5 SoCs, with different memory capacities. The
H3 version was supported in 4.16.
The H5 version is mostly the same as Neil's. I had the patches around
for a few days and was waiting for stuff to calm down for the H3/H5
branch. These patches are properly rebased.
Patch 1 fixes the regulator voltage specified for the VCC-1V2 regulator,
which is a fixed regulator and should obviously be outputting 1.2 volts,
not 3.3 volts.
Patch 2 splits out the common board design of the ALL-H3-CC.
Patch 3 cleans up the H2+ section of the ARM dts Makefile.
Patch 4 adds a device tree for the H2+ variant of ALL-H3-CC.
Patch 5 adds a cpu0 label for the first core on the H5 SoC.
This is needed so we can share the ALL-H3-CC device tree, which
already has DVFS enabled and fixed regulator set for the CPU domain.
Patch 6 cleans up the H5 section of the arm64 allwinner dts Makefile.
Patch 7 adds a device tree for the H5 variant of ALL-H3-CC.
Please have a look.
ChenYu
Chen-Yu Tsai (7):
ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VCC-1V2 regulator voltage
ARM: dts: sun8i: h3: Split out common board design for ALL-H3-CC
ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile
ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver.
arm64: dts: allwinner: h5: Add cpu0 label for first cpu
arm64: dts: allwinner: Sort dtb entries in Makefile
arm64: dts: allwinner: h5: Add Libre Computer Board ALL-H3-CC H5 ver.
arch/arm/boot/dts/Makefile | 3 +-
.../dts/sun8i-h2-plus-libretech-all-h3-cc.dts | 13 ++
.../boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 213 +-----------------
....dts => sunxi-hx-libretech-all-h3-cc.dtsi} | 15 +-
arch/arm64/boot/dts/allwinner/Makefile | 5 +-
.../sun50i-h5-libretech-all-h3-cc.dts | 14 ++
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +-
7 files changed, 40 insertions(+), 225 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
copy arch/arm/boot/dts/{sun8i-h3-libretech-all-h3-cc.dts => sunxi-hx-libretech-all-h3-cc.dtsi} (93%)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
--
2.17.0
next reply other threads:[~2018-04-24 11:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-24 11:34 Chen-Yu Tsai [this message]
2018-04-24 11:34 ` [PATCH 1/7] ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VCC-1V2 regulator voltage Chen-Yu Tsai
2018-04-24 11:52 ` Maxime Ripard
2018-04-24 11:34 ` [PATCH 2/7] ARM: dts: sun8i: h3: Split out common board design for ALL-H3-CC Chen-Yu Tsai
2018-04-24 12:13 ` Maxime Ripard
2018-04-24 12:17 ` Chen-Yu Tsai
2018-04-24 19:37 ` Maxime Ripard
2018-04-25 3:19 ` Chen-Yu Tsai
2018-04-25 12:39 ` Maxime Ripard
2018-04-25 13:59 ` Chen-Yu Tsai
2018-04-24 11:34 ` [PATCH 3/7] ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile Chen-Yu Tsai
2018-04-24 11:53 ` Maxime Ripard
2018-04-24 11:34 ` [PATCH 4/7] ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver Chen-Yu Tsai
2018-04-24 11:54 ` Maxime Ripard
2018-04-24 11:34 ` [PATCH 5/7] arm64: dts: allwinner: h5: Add cpu0 label for first cpu Chen-Yu Tsai
2018-04-24 11:54 ` Maxime Ripard
2018-04-24 11:34 ` [PATCH 6/7] arm64: dts: allwinner: Sort dtb entries in Makefile Chen-Yu Tsai
2018-04-24 11:54 ` Maxime Ripard
2018-04-24 11:34 ` [PATCH 7/7] arm64: dts: allwinner: h5: Add Libre Computer Board ALL-H3-CC H5 ver Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180424113424.13196-1-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox