From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@bootlin.com (Antoine Tenart) Date: Fri, 4 May 2018 15:56:43 +0200 Subject: [PATCH net-next v2 13/13] arm64: dts: marvell: 8040-db: describe the 10G SFP cages In-Reply-To: <20180504135643.23466-1-antoine.tenart@bootlin.com> References: <20180504135643.23466-1-antoine.tenart@bootlin.com> Message-ID: <20180504135643.23466-14-antoine.tenart@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds the SFP cages description for the 10G interfaces in the Marvell Armada 8080 DB board. Signed-off-by: Antoine Tenart --- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 5689fb23bbab..0a9aeac71614 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -70,6 +70,14 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&cp1_reg_usb3_0_vbus>; }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + }; }; &i2c0 { @@ -177,6 +185,8 @@ &cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + managed = "in-band-status"; + sfp = <&sfp_eth0>; }; &cp0_eth2 { @@ -303,6 +313,8 @@ &cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; }; &cp1_eth1 { -- 2.17.0