From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@bootlin.com (Maxime Ripard) Date: Fri, 4 May 2018 17:06:53 +0200 Subject: [PATCH 1/7] clk: sunxi-ng: add support for H6 PRCM CCU In-Reply-To: <20180503183847.11046-2-icenowy@aosc.io> References: <20180503183847.11046-1-icenowy@aosc.io> <20180503183847.11046-2-icenowy@aosc.io> Message-ID: <20180504150653.n2rqqhr45hrpjfw6@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, May 04, 2018 at 02:38:41AM +0800, Icenowy Zheng wrote: > The H6 has clock/reset controls in PRCM part, like old SoCs such as H3 > and A64. However, the PRCM CCU is rearranged; the register arragement > is now similar to the main CCU of H6, and the PRCM now has two APB > buses to control -- one is clocked from AHB clock derivde from AR100 > clock, the other is clocked from the same mux with AR100 clock. > Therefore a new driver is written for it. > > As there's no official document about the PRCM in H6, all the information > are indirectly collected from BSP and parts of the document, and the > information source is noted as comments in the driver's source code. If > reliable information is provided furtherly, the driver needs to be > rechecked. > > Signed-off-by: Icenowy Zheng Applied, thanks! Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: