From mboxrd@z Thu Jan 1 00:00:00 1970 From: johan@kernel.org (Johan Hovold) Date: Tue, 8 May 2018 12:08:51 +0200 Subject: [PATCH v3 3/3] tty: implement led triggers In-Reply-To: <20180508100543.12559-4-u.kleine-koenig@pengutronix.de> References: <20180508100543.12559-1-u.kleine-koenig@pengutronix.de> <20180508100543.12559-4-u.kleine-koenig@pengutronix.de> Message-ID: <20180508100851.GY2285@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, May 08, 2018 at 12:05:43PM +0200, Uwe Kleine-K?nig wrote: > The rx trigger fires when data is pushed to the ldisc by the driver. This > is a bit later than the actual receiving of data but has the nice benefit > that it doesn't need adaption for each driver and isn't in the hot path. > > Similarly the tx trigger fires when data was copied from userspace and is > given to the ldisc. > > Signed-off-by: Uwe Kleine-K?nig > --- > arch/arm/boot/dts/imx25-logitech-baby.dts | 192 ++++++++++++++++++++++ Looks like you included more than intended in this patch. > drivers/tty/Kconfig | 7 + > drivers/tty/tty_buffer.c | 2 + > drivers/tty/tty_io.c | 3 + > drivers/tty/tty_port.c | 32 +++- > include/linux/tty.h | 22 +++ > 6 files changed, 256 insertions(+), 2 deletions(-) > create mode 100644 arch/arm/boot/dts/imx25-logitech-baby.dts Johan