public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: maxime.ripard@bootlin.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: Allwinner A64: Issue on external rtc clock to wifi chip
Date: Mon, 14 May 2018 10:27:45 +0200	[thread overview]
Message-ID: <20180514082744.ydmfg5mzsbol5onu@flea> (raw)
In-Reply-To: <CAMty3ZDew=+zytKUx5+nX27CjCe0UfJpyYOy2s07NoJvbe57mQ@mail.gmail.com>

On Mon, May 14, 2018 at 01:34:56PM +0530, Jagan Teki wrote:
> On Mon, May 14, 2018 at 1:27 PM, Maxime Ripard
> <maxime.ripard@bootlin.com> wrote:
> > Hi,
> >
> > On Mon, May 14, 2018 at 12:37:49PM +0530, Jagan Teki wrote:
> >> Hi Maxime and All,
> >>
> >> We are trying to bring-up AP6330 Wifi chip for A64 board. We noticed
> >> to have an external rtc clock has driven from wifi chip.
> >>
> >> So the devicetree is configured according to this as below.
> >>
> >> / {
> >>         wifi_pwrseq: wifi-pwrseq {
> >>                 compatible = "mmc-pwrseq-simple";
> >>                 clocks = <&rtc 1>;
> >>                 clock-names = "ext_clock";
> >>                 reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
> >>                 post-power-on-delay-ms = <400>;
> >>         };
> >> };
> >>
> >> &rtc {
> >>         clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
> >>         clocks = <&osc32k>;
> >>         #clock-cells = <1>;
> >> };
> >>
> >> &mmc1 {
> >>         pinctrl-names = "default";
> >>         pinctrl-0 = <&mmc1_pins>;
> >>         vmmc-supply = <&reg_dcdc1>;
> >>         vqmmc-supply = <&reg_eldo1>;
> >>         mmc-pwrseq = <&wifi_pwrseq>;
> >>         bus-width = <4>;
> >>         non-removable;
> >>         status = "okay";
> >>
> >>         brcmf: wifi at 1 {
> >>                 reg = <1>;
> >>                 compatible = "brcm,bcm4329-fmac";
> >>                 interrupt-parent = <&r_pio>;
> >>                 interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;  /* WL-WAKE-AP: PL3 */
> >>                 interrupt-names = "host-wake";
> >>         };
> >> };
> >>
> >> And observed rtc-osc32k-out clock is never enabled[1] and the value of
> >> LOSC_OUT_GATING is 0x0 which eventually not enabling
> >> LOSC_OUT_GATING_EN
> >>
> >> Pls. let us know if we miss anything here?
> >>
> >> [1] https://paste.ubuntu.com/p/X2By4q8kD2/
> >
> > Could you paste your config and the logs from a boot to?
> 
> .config
> https://paste.ubuntu.com/p/w9w2KB7RFc/
> 
> dmesg
> https://paste.ubuntu.com/p/mrZGk5bWRR/

This is kind of weird. Have you tested with a 4.17 kernel? We have
runtime_pm changes lined up in next, so that might be a regression
there, even though we tested it with Quentin at some point.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180514/0edd0495/attachment.sig>

  reply	other threads:[~2018-05-14  8:27 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-14  7:07 Allwinner A64: Issue on external rtc clock to wifi chip Jagan Teki
2018-05-14  7:57 ` Maxime Ripard
2018-05-14  8:04   ` Jagan Teki
2018-05-14  8:27     ` Maxime Ripard [this message]
2018-05-14  9:04       ` Jagan Teki
2018-05-14  9:06         ` Maxime Ripard
2018-05-14  9:42           ` Jagan Teki
2018-05-14 11:17             ` Maxime Ripard
2018-05-28  7:08               ` Michael Nazzareno Trimarchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180514082744.ydmfg5mzsbol5onu@flea \
    --to=maxime.ripard@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox