From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Wed, 16 May 2018 17:52:03 +0200 Subject: [PATCH 2/2] ARM64: dts: meson-axg: remove incorrect i2c ao clock In-Reply-To: <20180516155203.24922-1-jbrunet@baylibre.com> References: <20180516155203.24922-1-jbrunet@baylibre.com> Message-ID: <20180516155203.24922-3-jbrunet@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The clock specified for the i2c AO controller is the one from the EE domain, which is incorrect as this controller needs the clock from AO clock controller. Replace with xtal to avoid claiming an unrelated gate until the required clock controller becomes available. Fixes: dc6f858e2690 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC") Signed-off-by: Jerome Brunet --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b59f341104d7..b82b9d79ec49 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1110,7 +1110,12 @@ compatible = "amlogic,meson-axg-i2c"; reg = <0x0 0x05000 0x0 0x20>; interrupts = ; - clocks = <&clkc CLKID_I2C>; + + /* + * FIXME: replace with the correct clock when + * the controller is available + */ + clocks = <&xtal>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; -- 2.14.3