From mboxrd@z Thu Jan 1 00:00:00 1970 From: jagan@amarulasolutions.com (Jagan Teki) Date: Fri, 18 May 2018 15:15:34 +0530 Subject: [PATCH v2 24/26] arm64: dts: allwinner: a64: a64-olinuxino: Enable HDMI output In-Reply-To: <20180518094536.17201-1-jagan@amarulasolutions.com> References: <20180518094536.17201-1-jagan@amarulasolutions.com> Message-ID: <20180518094536.17201-25-jagan@amarulasolutions.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Enable HDMI output on a64-olinuxino board. Signed-off-by: Jagan Teki --- Changes for v2: - none .../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 3b3081b10ecb..83329c8fec4f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -58,12 +58,38 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; }; +&de { + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; -- 2.14.3