From: sebastien.szymanski@armadeus.com (Sébastien Szymanski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL
Date: Tue, 22 May 2018 08:28:51 +0200 [thread overview]
Message-ID: <20180522062853.24799-1-sebastien.szymanski@armadeus.com> (raw)
Check the max speed supported from the fuses for i.MX6ULL and update the
operating points table accordingly.
Signed-off-by: S?bastien Szymanski <sebastien.szymanski@armadeus.com>
---
Changes for v3:
- none
Changes for v2:
- none
drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 83cf631fc9bc..f094687cae52 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
}
#define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2
+#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2
+#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3
static void imx6ul_opp_check_speed_grading(struct device *dev)
{
@@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev)
* Speed GRADING[1:0] defines the max speed of ARM:
* 2b'00: Reserved;
* 2b'01: 528000000Hz;
- * 2b'10: 696000000Hz;
- * 2b'11: Reserved;
+ * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL;
+ * 2b'11: 900000000Hz on i.MX6ULL only;
* We need to set the max speed of ARM according to fuse map.
*/
val = readl_relaxed(base + OCOTP_CFG3);
val >>= OCOTP_CFG3_SPEED_SHIFT;
val &= 0x3;
- if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
- if (dev_pm_opp_disable(dev, 696000000))
- dev_warn(dev, "failed to disable 696MHz OPP\n");
+
+ if (of_machine_is_compatible("fsl,imx6ul")) {
+ if (val != OCOTP_CFG3_6UL_SPEED_696MHZ)
+ if (dev_pm_opp_disable(dev, 696000000))
+ dev_warn(dev, "failed to disable 696MHz OPP\n");
+ }
+
+ if (of_machine_is_compatible("fsl,imx6ull")) {
+ if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ)
+ if (dev_pm_opp_disable(dev, 792000000))
+ dev_warn(dev, "failed to disable 792MHz OPP\n");
+
+ if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ)
+ if (dev_pm_opp_disable(dev, 900000000))
+ dev_warn(dev, "failed to disable 900MHz OPP\n");
+ }
+
iounmap(base);
put_node:
of_node_put(np);
@@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
goto put_reg;
}
- if (of_machine_is_compatible("fsl,imx6ul"))
+ if (of_machine_is_compatible("fsl,imx6ul") ||
+ of_machine_is_compatible("fsl,imx6ull"))
imx6ul_opp_check_speed_grading(cpu_dev);
else
imx6q_opp_check_speed_grading(cpu_dev);
--
2.16.1
next reply other threads:[~2018-05-22 6:28 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-22 6:28 Sébastien Szymanski [this message]
2018-05-22 6:28 ` [PATCH v3 2/3] ARM: dts: imx6ull: add operating points Sébastien Szymanski
2018-05-22 6:28 ` [PATCH v3 3/3] ARM: dts: imx6ull-colibri-wifi: remove " Sébastien Szymanski
2018-05-23 4:30 ` Viresh Kumar
2018-05-23 9:07 ` Stefan Agner
2018-05-23 4:29 ` [PATCH v3 1/3] cpufreq: imx6q: check speed grades for i.MX6ULL Viresh Kumar
2018-06-05 7:07 ` Sébastien Szymanski
2018-05-23 4:30 ` Viresh Kumar
2018-05-23 9:02 ` Stefan Agner
2018-06-05 11:01 ` Fabio Estevam
2018-06-11 5:38 ` Shawn Guo
2018-06-12 14:57 ` Rafael J. Wysocki
2018-06-25 8:01 ` Sébastien Szymanski
2018-06-25 8:06 ` Rafael J. Wysocki
2018-06-28 0:48 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180522062853.24799-1-sebastien.szymanski@armadeus.com \
--to=sebastien.szymanski@armadeus.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).