From mboxrd@z Thu Jan 1 00:00:00 1970 From: marek.vasut@gmail.com (Marek Vasut) Date: Wed, 23 May 2018 13:43:40 +0200 Subject: [PATCH] ARM: dts: porter: Add missing PMIC nodes Message-ID: <20180523114340.10216-1-marek.vasut+renesas@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add PMIC nodes to Porter and connect CPU DVFS supply. There is one DA9063L and one DA9210 on Porter, the only difference from the other boards is that DA9063L is at I2C address 0x5a rather than 0x58 . Signed-off-by: Marek Vasut Cc: Geert Uytterhoeven Cc: Kuninori Morimoto Cc: Simon Horman Cc: Wolfram Sang Cc: linux-renesas-soc at vger.kernel.org --- arch/arm/boot/dts/r8a7791-porter.dts | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index a01101b49d99..5f77d73d7462 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -375,10 +375,43 @@ clock-frequency = <400000>; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pmic at 5a { + compatible = "dlg,da9063l"; + reg = <0x5a>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + + vdd_dvfs: regulator at 68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + &sata0 { status = "okay"; }; +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + /* composite video input */ &vin0 { status = "okay"; -- 2.16.2