From: Jisheng.Zhang@synaptics.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails
Date: Fri, 25 May 2018 15:15:09 +0800 [thread overview]
Message-ID: <20180525151509.0270dbe1@xhacker.debian> (raw)
I noticed below error msg with sdhci-pxav3 on some berlin platforms:
[.....] sdhci-pxav3 f7ab0000.sdhci failed to add host
It is due to getting related vmmc or vqmmc regulator returns
-EPROBE_DEFER. It doesn't matter at all but it's confusing.
>From another side, if driver probing fails and the error number isn't
-EPROBE_DEFER, the core will tell us something as below:
[.....] sdhci-pxav3: probe of f7ab0000.sdhci failed with error -EXX
So it's not necessary to emit error msg if sdhci_add_host() fails. And
some other sdhci host drivers also have this issue, let's fix them
together.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
drivers/mmc/host/sdhci-bcm-kona.c | 4 +---
drivers/mmc/host/sdhci-pic32.c | 4 +---
drivers/mmc/host/sdhci-pxav2.c | 4 +---
drivers/mmc/host/sdhci-pxav3.c | 4 +---
drivers/mmc/host/sdhci-s3c.c | 4 +---
drivers/mmc/host/sdhci-spear.c | 4 +---
drivers/mmc/host/sdhci-st.c | 4 +---
7 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
index 11ca95c60bcf..bdbd4897c0f7 100644
--- a/drivers/mmc/host/sdhci-bcm-kona.c
+++ b/drivers/mmc/host/sdhci-bcm-kona.c
@@ -284,10 +284,8 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
sdhci_bcm_kona_sd_init(host);
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(dev, "Failed sdhci_add_host\n");
+ if (ret)
goto err_reset;
- }
/* if device is eMMC, emulate card insert right here */
if (!mmc_card_is_removable(host->mmc)) {
diff --git a/drivers/mmc/host/sdhci-pic32.c b/drivers/mmc/host/sdhci-pic32.c
index a6caa49ca25a..a11e6397d4ff 100644
--- a/drivers/mmc/host/sdhci-pic32.c
+++ b/drivers/mmc/host/sdhci-pic32.c
@@ -200,10 +200,8 @@ static int pic32_sdhci_probe(struct platform_device *pdev)
}
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(&pdev->dev, "error adding host\n");
+ if (ret)
goto err_base_clk;
- }
dev_info(&pdev->dev, "Successfully added sdhci host\n");
return 0;
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index 8986f9d9cf98..2c3827f54927 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -221,10 +221,8 @@ static int sdhci_pxav2_probe(struct platform_device *pdev)
host->ops = &pxav2_sdhci_ops;
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(&pdev->dev, "failed to add host\n");
+ if (ret)
goto disable_clk;
- }
return 0;
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index a34434166ca7..b8e96f392428 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -472,10 +472,8 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
pm_suspend_ignore_children(&pdev->dev, 1);
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(&pdev->dev, "failed to add host\n");
+ if (ret)
goto err_add_host;
- }
if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)
device_init_wakeup(&pdev->dev, 1);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index cda83ccb2702..9ef89d00970e 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -655,10 +655,8 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
goto err_req_regs;
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(dev, "sdhci_add_host() failed\n");
+ if (ret)
goto err_req_regs;
- }
#ifdef CONFIG_PM
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 14511526a3a8..9247d51f2eed 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -126,10 +126,8 @@ static int sdhci_probe(struct platform_device *pdev)
}
ret = sdhci_add_host(host);
- if (ret) {
- dev_dbg(&pdev->dev, "error adding host\n");
+ if (ret)
goto disable_clk;
- }
platform_set_drvdata(pdev, host);
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
index c32daed0d418..8f95647195d9 100644
--- a/drivers/mmc/host/sdhci-st.c
+++ b/drivers/mmc/host/sdhci-st.c
@@ -422,10 +422,8 @@ static int sdhci_st_probe(struct platform_device *pdev)
st_mmcss_cconfig(np, host);
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(&pdev->dev, "Failed sdhci_add_host\n");
+ if (ret)
goto err_out;
- }
host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
--
2.17.0
next reply other threads:[~2018-05-25 7:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 7:15 Jisheng Zhang [this message]
2018-05-25 9:05 ` [PATCH] mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails Adrian Hunter
2018-05-25 10:18 ` Viresh Kumar
2018-05-25 12:42 ` Patrice CHOTARD
2018-05-28 11:27 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180525151509.0270dbe1@xhacker.debian \
--to=jisheng.zhang@synaptics.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).