[PATCH] arm64: defconfig: Enable PCIe on msm8996 and db820c

[bjorn.andersson@linaro.org (Bjorn Andersson)]

The msm8996 PCIe sits behind the "agnoc0", which is represented as a
simple-pm-bus, so enable support for this. Then enable the QMP phy
driver.

Also enable the atl1c ethernet driver and ath10k wlan driver to support
these components on the DragonBoard820c.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 895b2d92124d..e3687afdd64c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -173,6 +173,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
@@ -213,6 +214,7 @@ CONFIG_VETH=m
 CONFIG_VIRTIO_NET=y
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
+CONFIG_ATL1C=m
 CONFIG_MACB=y
 CONFIG_THUNDER_NIC_PF=y
 CONFIG_HNS_DSAF=y
@@ -254,6 +256,8 @@ CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
 CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_PCIE=m
@@ -615,6 +619,7 @@ CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_EMMC=y
 CONFIG_PHY_ROCKCHIP_PCIE=m
-- 
2.17.0