From: akurz@blala.de (Alexander Kurz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: dts: imx6 wandboard and riotboard: remove regulators bus node
Date: Sat, 26 May 2018 18:30:51 +0000 [thread overview]
Message-ID: <20180526183053.14029-2-akurz@blala.de> (raw)
In-Reply-To: <20180526183053.14029-1-akurz@blala.de>
To match the convention, move regulator-fixed nodes directly into
the root node.
Signed-off-by: Alexander Kurz <akurz@blala.de>
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 55 +++++++++++++-------------------
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 40 ++++++++++-------------
2 files changed, 39 insertions(+), 56 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2e98c92adff7..a52e05934e3a 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -19,38 +19,6 @@
reg = <0x10000000 0x40000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_2p5v: regulator at 0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
-
- reg_3p3v: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_usb_otg_vbus: regulator at 2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -82,6 +50,29 @@
mux-int-port = <1>;
mux-ext-port = <3>;
};
+
+ reg_2p5v: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3p3v: fixedregulator at 1 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb_otg_vbus: fixedregulator at 2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
};
&audmux {
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index ed96d7b5feab..ff7e824dfd28 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -12,30 +12,6 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_2p5v: regulator at 0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
-
sound {
compatible = "fsl,imx6-wandboard-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -56,6 +32,22 @@
spdif-controller = <&spdif>;
spdif-out;
};
+
+ reg_2p5v: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: fixedregulator at 1 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
&audmux {
--
2.11.0
next prev parent reply other threads:[~2018-05-26 18:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-26 18:30 ARM: dts: imx6: enable OTG on wandboard and riotboard Alexander Kurz
2018-05-26 18:30 ` Alexander Kurz [this message]
2018-05-27 16:40 ` [PATCH 1/3] ARM: dts: imx6 wandboard and riotboard: remove regulators bus node Fabio Estevam
2018-05-28 0:56 ` Fabio Estevam
2018-05-26 18:30 ` [PATCH 2/3] ARM: dts: imx6qdl-wandboard: enable USB OTG Alexander Kurz
2018-05-26 18:30 ` [PATCH 3/3] ARM: dts: imx6dl-riotboard: fix OTG regulator polarity Alexander Kurz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180526183053.14029-2-akurz@blala.de \
--to=akurz@blala.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox