From mboxrd@z Thu Jan  1 00:00:00 1970
From: lee.jones@linaro.org (Lee Jones)
Date: Tue, 29 May 2018 09:33:49 +0100
Subject: [PATCH v2 0/6] Driver for at91 usart in spi mode
In-Reply-To: <20180529083303.GF4790@dell>
References: <20180504154714.5109-1-radu.pirea@microchip.com>
 <20180529083303.GF4790@dell>
Message-ID: <20180529083349.GG4790@dell>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, 29 May 2018, Lee Jones wrote:

> On Fri, 04 May 2018, Radu Pirea wrote:
> 
> > Hello,
> > 
> > This is the second version of driver. I added a mfd driver which by
> > default probes atmel_serial driver and if in dt is specified to probe
> > the spi driver, then the spi-at91-usart driver will be probed. The
> > compatible for atmel_serial is now the compatible for at91-usart mfd
> > driver and compatilbe for atmel_serial driver was changed in order to
> > keep the bindings for serial as they are.
> > 
> > Changes in v1:
> > - added spi-at91-usart driver
> > 
> > Changes in v2:
> > - added at91-usart mfd driver
> > - modified spi-at91-usart driver to work as mfd driver child
> > - modified atmel_serial driver to work as mfd driver child
> > 
> > Radu Pirea (6):
> >   MAINTAINERS: add at91 usart mfd driver
> >   mfd: at91-usart: added mfd driver for usart
> >   MAINTAINERS: add at91 usart spi driver
> >   dt-bindings: add binding for at91-usart in spi mode
> >   spi: at91-usart: add driver for at91-usart as spi
> >   tty/serial: atmel: changed the driver to work under at91-usart mfd
> > 
> >  .../bindings/spi/microchip,at91-usart-spi.txt |  28 +
> >  MAINTAINERS                                   |  14 +
> >  drivers/mfd/Kconfig                           |  10 +
> >  drivers/mfd/Makefile                          |   1 +
> >  drivers/mfd/at91-usart.c                      |  81 +++
> >  drivers/spi/Kconfig                           |   9 +
> >  drivers/spi/Makefile                          |   1 +
> >  drivers/spi/spi-at91-usart.c                  | 545 ++++++++++++++++++
> >  drivers/tty/serial/Kconfig                    |   1 +
> >  drivers/tty/serial/atmel_serial.c             |  29 +-
> >  include/dt-bindings/mfd/at91-usart.h          |  17 +
> >  11 files changed, 722 insertions(+), 14 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/spi/microchip,at91-usart-spi.txt
> >  create mode 100644 drivers/mfd/at91-usart.c
> >  create mode 100644 drivers/spi/spi-at91-usart.c
> >  create mode 100644 include/dt-bindings/mfd/at91-usart.h
> 
> Applied, thanks.

Whoops!  Ignore this, wrong patch!

-- 
Lee Jones [???]
Linaro Services Technical Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog