[PATCH] mtd: nand: raw: atmel: add module param to avoid using dma

[boris.brezillon@bootlin.com (Boris Brezillon)]

On Tue, 29 May 2018 17:46:21 +0200
Boris Brezillon <boris.brezillon@bootlin.com> wrote:

> On Tue, 29 May 2018 18:21:40 +0300
> Eugen Hristev <eugen.hristev@microchip.com> wrote:
> 
> > On 29.05.2018 18:15, Boris Brezillon wrote:  
> > > On Tue, 29 May 2018 18:01:40 +0300
> > > Eugen Hristev <eugen.hristev@microchip.com> wrote:
> > >     
> > >> [...]
> > >>
> > >>    
> > >>>
> > >>> I think you're missing something here. We use the DMA engine in memcpy
> > >>> mode (SRAM -> DRAM), not in device mode (dev -> DRAM or DRAM -> dev).
> > >>> So there's no dmas prop defined in the DT and there should not be.
> > >>>
> > >>> Regards,
> > >>>
> > >>> Boris
> > >>>        
> > >>
> > >> Ok, so the memcpy SRAM <-> DRAM will hog the transfer between DRAM and
> > >> LCD if my understanding is correct. That's the DMA that Peter wants to
> > >> disable with his patch ?
> > >>
> > >> Then we can then try to force NFC SRAM DMA channels to use just DDR port
> > >> 1 or 2 for memcpy ?    
> > > 
> > > You mean the dmaengine? According to "14.1.3 Master to Slave Access"
> > > that's already the case.
> > > 
> > > Only DMAC0 can access the NFC SRAM and it's done through DMAC0:IF0,
> > > then access to DDR is going through port DDR port 1 (DMAC0:IF1) or 2
> > > (DMAC0:IF0).    
> > 
> > If we can make NFC use port 1 only, then HLCDC could have two ports as 
> > master 8 & 9, maybe a better bandwidth.  
> 
> Peter, can you try with the following patch?

Actually that won't work because all SRAMs are on IF0, and here we use
DMA memcpy to copy things from/to the SRAM to/from the DRAM. I have no
simple solution to force usage of IF1 when accessing the DRAM but I'm
also not sure this will solve Peter's problem since forcing LCDC to use
DDR port 3 did not make things better. 

> 
> --->8---  
> diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
> index ef3f227ce3e6..2a48e870f292 100644
> --- a/drivers/dma/at_hdmac_regs.h
> +++ b/drivers/dma/at_hdmac_regs.h
> @@ -124,8 +124,8 @@
>  #define        ATC_SIF(i)              (0x3 & (i))     /* Src tx done via AHB-Lite Interface i */
>  #define        ATC_DIF(i)              ((0x3 & (i)) <<  4)     /* Dst tx done via AHB-Lite Interface i */
>                                   /* Specify AHB interfaces */
> -#define AT_DMA_MEM_IF          0 /* interface 0 as memory interface */
> -#define AT_DMA_PER_IF          1 /* interface 1 as peripheral interface */
> +#define AT_DMA_MEM_IF          1 /* interface 0 as memory interface */
> +#define AT_DMA_PER_IF          0 /* interface 1 as peripheral interface */
>  
>  #define        ATC_SRC_PIP             (0x1 <<  8)     /* Source Picture-in-Picture enabled */
>  #define        ATC_DST_PIP             (0x1 << 12)     /* Destination Picture-in-Picture enabled */