From mboxrd@z Thu Jan  1 00:00:00 1970
From: tony@atomide.com (Tony Lindgren)
Date: Wed, 30 May 2018 07:50:47 -0700
Subject: [PATCH v2 1/6] ARM: dra762: hwmod: Add MCAN support
In-Reply-To: <20180530141133.3711-2-faiz_abbas@ti.com>
References: <20180530141133.3711-1-faiz_abbas@ti.com>
 <20180530141133.3711-2-faiz_abbas@ti.com>
Message-ID: <20180530145047.GC5705@atomide.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

* Faiz Abbas <faiz_abbas@ti.com> [180530 14:12]:
> From: Lokesh Vutla <lokeshvutla@ti.com>
> 
> Add MCAN hwmod data and register it for dra762 silicons.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 32 +++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index 62352d1e6361..a2cd7f865a60 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1355,6 +1355,29 @@ static struct omap_hwmod dra7xx_mailbox13_hwmod = {
>  	},
>  };
>  
> +/*
> + * 'mcan' class
> + *
> + */
> +static struct omap_hwmod_class dra76x_mcan_hwmod_class = {
> +	.name	= "mcan",
> +};
> +
> +/* mcan */
> +static struct omap_hwmod dra76x_mcan_hwmod = {
> +	.name		= "mcan",
> +	.class		= &dra76x_mcan_hwmod_class,
> +	.clkdm_name	= "wkupaon_clkdm",
> +	.main_clk	= "mcan_clk",
> +	.prcm = {
> +		.omap4 = {
> +			.clkctrl_offs = DRA7XX_CM_WKUPAON_ADC_CLKCTRL_OFFSET,
> +			.context_offs = DRA7XX_RM_WKUPAON_ADC_CONTEXT_OFFSET,
> +			.modulemode   = MODULEMODE_SWCTRL,
> +		},
> +	},
> +};

You should be now able to leave out at least the clkctrl_offs and modulemode
here. Please also check if leaving out clkdm_name and main_clk now works :)

> @@ -3818,6 +3841,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss2 = {
>  	.user		= OCP_USER_MPU,
>  };
>  
> +/* l3_main_1 -> mcan */
> +static struct omap_hwmod_ocp_if dra76x_l3_main_1__mcan = {
> +	.master		= &dra7xx_l3_main_1_hwmod,
> +	.slave		= &dra76x_mcan_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};

I think this we still need though for the clk. Tero, do you have any comments
on what all clocks can now be left out?

Regards,

Tony