From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 17/33] KVM: arm64: Remove eager host SVE state saving
Date: Fri, 1 Jun 2018 16:27:31 +0100 [thread overview]
Message-ID: <20180601152747.23613-18-marc.zyngier@arm.com> (raw)
In-Reply-To: <20180601152747.23613-1-marc.zyngier@arm.com>
From: Dave Martin <Dave.Martin@arm.com>
Now that the host SVE context can be saved on demand from Hyp,
there is no longer any need to save this state in advance before
entering the guest.
This patch removes the relevant call to
kvm_fpsimd_flush_cpu_state().
Since the problem that function was intended to solve now no longer
exists, the function and its dependencies are also deleted.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Benn?e <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/include/asm/kvm_host.h | 3 ---
arch/arm64/include/asm/kvm_host.h | 10 ----------
arch/arm64/kernel/fpsimd.c | 21 ---------------------
virt/kvm/arm/arm.c | 3 ---
4 files changed, 37 deletions(-)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 3b85bbb4b23e..f079a2039c8a 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -312,9 +312,6 @@ static inline void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) {}
static inline void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu) {}
static inline void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) {}
-/* All host FP/SIMD state is restored on guest exit, so nothing to save: */
-static inline void kvm_fpsimd_flush_cpu_state(void) {}
-
static inline void kvm_arm_vhe_guest_enter(void) {}
static inline void kvm_arm_vhe_guest_exit(void) {}
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index fda9289f3b9c..a4ca202ff3f2 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -457,16 +457,6 @@ static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
}
#endif
-/*
- * All host FP/SIMD state is restored on guest exit, so nothing needs
- * doing here except in the SVE case:
-*/
-static inline void kvm_fpsimd_flush_cpu_state(void)
-{
- if (system_supports_sve())
- sve_flush_cpu_state();
-}
-
static inline void kvm_arm_vhe_guest_enter(void)
{
local_daif_mask();
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index e60c3a28380f..7074c4cd0e0e 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -120,7 +120,6 @@
*/
struct fpsimd_last_state_struct {
struct user_fpsimd_state *st;
- bool sve_in_use;
};
static DEFINE_PER_CPU(struct fpsimd_last_state_struct, fpsimd_last_state);
@@ -1008,7 +1007,6 @@ void fpsimd_bind_task_to_cpu(void)
this_cpu_ptr(&fpsimd_last_state);
last->st = ¤t->thread.uw.fpsimd_state;
- last->sve_in_use = test_thread_flag(TIF_SVE);
current->thread.fpsimd_cpu = smp_processor_id();
if (system_supports_sve()) {
@@ -1030,7 +1028,6 @@ void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st)
WARN_ON(!in_softirq() && !irqs_disabled());
last->st = st;
- last->sve_in_use = false;
}
/*
@@ -1091,24 +1088,6 @@ void fpsimd_flush_cpu_state(void)
set_thread_flag(TIF_FOREIGN_FPSTATE);
}
-/*
- * Invalidate any task SVE state currently held in this CPU's regs.
- *
- * This is used to prevent the kernel from trying to reuse SVE register data
- * that is detroyed by KVM guest enter/exit. This function should go away when
- * KVM SVE support is implemented. Don't use it for anything else.
- */
-#ifdef CONFIG_ARM64_SVE
-void sve_flush_cpu_state(void)
-{
- struct fpsimd_last_state_struct const *last =
- this_cpu_ptr(&fpsimd_last_state);
-
- if (last->st && last->sve_in_use)
- fpsimd_flush_cpu_state();
-}
-#endif /* CONFIG_ARM64_SVE */
-
#ifdef CONFIG_KERNEL_MODE_NEON
DEFINE_PER_CPU(bool, kernel_neon_busy);
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index ce7c6f36471b..39e777155e7c 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -682,9 +682,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
*/
preempt_disable();
- /* Flush FP/SIMD state that can't survive guest entry/exit */
- kvm_fpsimd_flush_cpu_state();
-
kvm_pmu_flush_hwstate(vcpu);
local_irq_disable();
--
2.17.1
next prev parent reply other threads:[~2018-06-01 15:27 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-01 15:27 [GIT PULL] KVM/ARM updates for 4.18 Marc Zyngier
2018-06-01 15:27 ` [PATCH 01/33] arm64: KVM: Use lm_alias() for kvm_ksym_ref() Marc Zyngier
2018-06-01 15:27 ` [PATCH 02/33] arm64: fpsimd: Fix TIF_FOREIGN_FPSTATE after invalidating cpu regs Marc Zyngier
2018-06-01 15:27 ` [PATCH 03/33] thread_info: Add update_thread_flag() helpers Marc Zyngier
2018-06-01 15:27 ` [PATCH 04/33] arm64: Use update{,_tsk}_thread_flag() Marc Zyngier
2018-06-01 15:27 ` [PATCH 05/33] KVM: arm/arm64: Introduce kvm_arch_vcpu_run_pid_change Marc Zyngier
2018-06-01 15:27 ` [PATCH 06/33] KVM: arm64: Convert lazy FPSIMD context switch trap to C Marc Zyngier
2018-06-01 15:27 ` [PATCH 07/33] arm64: fpsimd: Generalise context saving for non-task contexts Marc Zyngier
2018-06-01 15:27 ` [PATCH 08/33] arm64: fpsimd: Avoid FPSIMD context leakage for the init task Marc Zyngier
2018-06-01 15:27 ` [PATCH 09/33] arm64: fpsimd: Eliminate task->mm checks Marc Zyngier
2018-06-01 15:27 ` [PATCH 10/33] arm64/sve: Refactor user SVE trap maintenance for external use Marc Zyngier
2018-06-01 15:27 ` [PATCH 11/33] KVM: arm64: Repurpose vcpu_arch.debug_flags for general-purpose flags Marc Zyngier
2018-06-01 15:27 ` [PATCH 12/33] KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing Marc Zyngier
2018-06-01 15:27 ` [PATCH 13/33] arm64/sve: Move read_zcr_features() out of cpufeature.h Marc Zyngier
2018-06-01 15:27 ` [PATCH 14/33] arm64/sve: Switch sve_pffr() argument from task to thread Marc Zyngier
2018-06-01 15:27 ` [PATCH 15/33] arm64/sve: Move sve_pffr() to fpsimd.h and make inline Marc Zyngier
2018-06-01 15:27 ` [PATCH 16/33] KVM: arm64: Save host SVE context as appropriate Marc Zyngier
2018-06-01 15:27 ` Marc Zyngier [this message]
2018-06-01 15:27 ` [PATCH 18/33] KVM: arm64: Remove redundant *exit_code changes in fpsimd_guest_exit() Marc Zyngier
2018-06-01 15:27 ` [PATCH 19/33] KVM: arm64: Fold redundant exit code checks out of fixup_guest_exit() Marc Zyngier
2018-06-01 15:27 ` [PATCH 20/33] KVM: arm64: Invoke FPSIMD context switch trap from C Marc Zyngier
2018-06-01 15:27 ` [PATCH 21/33] KVM: arm/arm64: Set dist->spis to NULL after kfree Marc Zyngier
2018-06-01 15:27 ` [PATCH 22/33] KVM: arm/arm64: Document KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION Marc Zyngier
2018-06-01 15:27 ` [PATCH 23/33] KVM: arm/arm64: Replace the single rdist region by a list Marc Zyngier
2018-06-01 15:27 ` [PATCH 24/33] KVM: arm/arm64: Helper to locate free rdist index Marc Zyngier
2018-06-01 15:27 ` [PATCH 25/33] KVM: arm/arm64: Revisit Redistributor TYPER last bit computation Marc Zyngier
2018-06-01 15:27 ` [PATCH 26/33] KVM: arm/arm64: Adapt vgic_v3_check_base to multiple rdist regions Marc Zyngier
2018-06-01 15:27 ` [PATCH 27/33] KVM: arm/arm64: Helper to register a new redistributor region Marc Zyngier
2018-06-01 15:27 ` [PATCH 28/33] KVM: arm/arm64: Remove kvm_vgic_vcpu_early_init Marc Zyngier
2018-06-01 15:27 ` [PATCH 29/33] KVM: arm/arm64: Check vcpu redist base before registering an iodev Marc Zyngier
2018-06-01 15:27 ` [PATCH 30/33] KVM: arm/arm64: Check all vcpu redistributors are set on map_resources Marc Zyngier
2018-06-01 15:27 ` [PATCH 31/33] KVM: arm/arm64: Add KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION Marc Zyngier
2018-06-01 15:27 ` [PATCH 32/33] KVM: arm/arm64: Implement KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION Marc Zyngier
2018-06-01 15:27 ` [PATCH 33/33] KVM: arm/arm64: Bump VGIC_V3_MAX_CPUS to 512 Marc Zyngier
2018-06-01 17:18 ` [GIT PULL] KVM/ARM updates for 4.18 Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180601152747.23613-18-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox