From: lkp@intel.com (kbuild test robot)
To: linux-arm-kernel@lists.infradead.org
Subject: [clk:clk-bcm-stingray 1/2] drivers/clk/bcm/clk-sr.c:217:3: error: 'BCM_SR_LCPLL0_SATA_REF_CLK' undeclared here (not in a function); did you mean 'BCM_SR_LCPLL0_SATA_REFN_CLK'?
Date: Sat, 2 Jun 2018 17:01:49 +0800 [thread overview]
Message-ID: <201806021742.e6HPCQOb%fengguang.wu@intel.com> (raw)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-bcm-stingray
head: 5afa881c6635427e68c73861a2c22d8cac00b984
commit: 48bf9a522c14449cc7c214c6062668ac54e4e88f [1/2] dt-bindings: clk: Update Stingray binding doc
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
git checkout 48bf9a522c14449cc7c214c6062668ac54e4e88f
# save the attached .config to linux build tree
make.cross ARCH=sh
Note: the clk/clk-bcm-stingray HEAD 5afa881c6635427e68c73861a2c22d8cac00b984 builds fine.
It only hurts bisectibility.
All errors (new ones prefixed by >>):
drivers/clk/bcm/clk-sr.c:59:3: error: 'BCM_SR_GENPLL0_SATA_CLK' undeclared here (not in a function); did you mean 'BCM_SR_GENPLL0_SCR_CLK'?
[BCM_SR_GENPLL0_SATA_CLK] = {
^~~~~~~~~~~~~~~~~~~~~~~
BCM_SR_GENPLL0_SCR_CLK
drivers/clk/bcm/clk-sr.c:59:3: error: array index in initializer not of integer type
drivers/clk/bcm/clk-sr.c:59:3: note: (near initialization for 'sr_genpll0_clk')
drivers/clk/bcm/clk-sr.c:184:3: error: 'BCM_SR_GENPLL5_FS_CLK' undeclared here (not in a function); did you mean 'BCM_SR_GENPLL2_FS4_CLK'?
[BCM_SR_GENPLL5_FS_CLK] = {
^~~~~~~~~~~~~~~~~~~~~
BCM_SR_GENPLL2_FS4_CLK
drivers/clk/bcm/clk-sr.c:184:3: error: array index in initializer not of integer type
drivers/clk/bcm/clk-sr.c:184:3: note: (near initialization for 'sr_genpll5_clk')
drivers/clk/bcm/clk-sr.c:185:14: warning: initialization makes integer from pointer without a cast [-Wint-conversion]
.channel = BCM_SR_GENPLL5_FS_CLK,
^~~~~~~~~~~~~~~~~~~~~
drivers/clk/bcm/clk-sr.c:185:14: note: (near initialization for 'sr_genpll5_clk[0].channel')
drivers/clk/bcm/clk-sr.c:185:14: error: initializer element is not constant
drivers/clk/bcm/clk-sr.c:185:14: note: (near initialization for 'sr_genpll5_clk[0].channel')
drivers/clk/bcm/clk-sr.c:190:3: error: 'BCM_SR_GENPLL5_SPU_CLK' undeclared here (not in a function); did you mean 'BCM_SR_GENPLL5_FS_CLK'?
[BCM_SR_GENPLL5_SPU_CLK] = {
^~~~~~~~~~~~~~~~~~~~~~
BCM_SR_GENPLL5_FS_CLK
drivers/clk/bcm/clk-sr.c:190:3: error: array index in initializer not of integer type
drivers/clk/bcm/clk-sr.c:190:3: note: (near initialization for 'sr_genpll5_clk')
drivers/clk/bcm/clk-sr.c:191:14: warning: initialization makes integer from pointer without a cast [-Wint-conversion]
.channel = BCM_SR_GENPLL5_SPU_CLK,
^~~~~~~~~~~~~~~~~~~~~~
drivers/clk/bcm/clk-sr.c:191:14: note: (near initialization for 'sr_genpll5_clk[1].channel')
drivers/clk/bcm/clk-sr.c:191:14: error: initializer element is not constant
drivers/clk/bcm/clk-sr.c:191:14: note: (near initialization for 'sr_genpll5_clk[1].channel')
>> drivers/clk/bcm/clk-sr.c:217:3: error: 'BCM_SR_LCPLL0_SATA_REF_CLK' undeclared here (not in a function); did you mean 'BCM_SR_LCPLL0_SATA_REFN_CLK'?
[BCM_SR_LCPLL0_SATA_REF_CLK] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~
BCM_SR_LCPLL0_SATA_REFN_CLK
drivers/clk/bcm/clk-sr.c:217:3: error: array index in initializer not of integer type
drivers/clk/bcm/clk-sr.c:217:3: note: (near initialization for 'sr_lcpll0_clk')
drivers/clk/bcm/clk-sr.c:218:14: warning: initialization makes integer from pointer without a cast [-Wint-conversion]
.channel = BCM_SR_LCPLL0_SATA_REF_CLK,
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/bcm/clk-sr.c:218:14: note: (near initialization for 'sr_lcpll0_clk[0].channel')
drivers/clk/bcm/clk-sr.c:218:14: error: initializer element is not constant
drivers/clk/bcm/clk-sr.c:218:14: note: (near initialization for 'sr_lcpll0_clk[0].channel')
drivers/clk/bcm/clk-sr.c:223:3: error: 'BCM_SR_LCPLL0_USB_REF_CLK' undeclared here (not in a function); did you mean 'BCM_SR_LCPLL1_USB_REF_CLK'?
[BCM_SR_LCPLL0_USB_REF_CLK] = {
^~~~~~~~~~~~~~~~~~~~~~~~~
BCM_SR_LCPLL1_USB_REF_CLK
drivers/clk/bcm/clk-sr.c:223:3: error: array index in initializer not of integer type
drivers/clk/bcm/clk-sr.c:223:3: note: (near initialization for 'sr_lcpll0_clk')
drivers/clk/bcm/clk-sr.c:224:14: warning: initialization makes integer from pointer without a cast [-Wint-conversion]
.channel = BCM_SR_LCPLL0_USB_REF_CLK,
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/bcm/clk-sr.c:224:14: note: (near initialization for 'sr_lcpll0_clk[1].channel')
drivers/clk/bcm/clk-sr.c:224:14: error: initializer element is not constant
drivers/clk/bcm/clk-sr.c:224:14: note: (near initialization for 'sr_lcpll0_clk[1].channel')
>> drivers/clk/bcm/clk-sr.c:229:3: error: 'BCM_SR_LCPLL0_SATA_REFPN_CLK' undeclared here (not in a function); did you mean 'BCM_SR_LCPLL0_SATA_REFN_CLK'?
[BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
BCM_SR_LCPLL0_SATA_REFN_CLK
drivers/clk/bcm/clk-sr.c:229:3: error: array index in initializer not of integer type
drivers/clk/bcm/clk-sr.c:229:3: note: (near initialization for 'sr_lcpll0_clk')
drivers/clk/bcm/clk-sr.c:230:14: warning: initialization makes integer from pointer without a cast [-Wint-conversion]
.channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/bcm/clk-sr.c:230:14: note: (near initialization for 'sr_lcpll0_clk[2].channel')
drivers/clk/bcm/clk-sr.c:230:14: error: initializer element is not constant
drivers/clk/bcm/clk-sr.c:230:14: note: (near initialization for 'sr_lcpll0_clk[2].channel')
vim +217 drivers/clk/bcm/clk-sr.c
654cdd32 Sandeep Tripathy 2017-06-06 182
654cdd32 Sandeep Tripathy 2017-06-06 183 static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
654cdd32 Sandeep Tripathy 2017-06-06 184 [BCM_SR_GENPLL5_FS_CLK] = {
654cdd32 Sandeep Tripathy 2017-06-06 185 .channel = BCM_SR_GENPLL5_FS_CLK,
654cdd32 Sandeep Tripathy 2017-06-06 186 .flags = IPROC_CLK_AON,
654cdd32 Sandeep Tripathy 2017-06-06 187 .enable = ENABLE_VAL(0x4, 6, 0, 12),
654cdd32 Sandeep Tripathy 2017-06-06 188 .mdiv = REG_VAL(0x18, 0, 9),
654cdd32 Sandeep Tripathy 2017-06-06 189 },
654cdd32 Sandeep Tripathy 2017-06-06 @190 [BCM_SR_GENPLL5_SPU_CLK] = {
654cdd32 Sandeep Tripathy 2017-06-06 191 .channel = BCM_SR_GENPLL5_SPU_CLK,
654cdd32 Sandeep Tripathy 2017-06-06 192 .flags = IPROC_CLK_AON,
654cdd32 Sandeep Tripathy 2017-06-06 193 .enable = ENABLE_VAL(0x4, 6, 0, 12),
654cdd32 Sandeep Tripathy 2017-06-06 194 .mdiv = REG_VAL(0x18, 10, 9),
654cdd32 Sandeep Tripathy 2017-06-06 195 },
654cdd32 Sandeep Tripathy 2017-06-06 196 };
654cdd32 Sandeep Tripathy 2017-06-06 197
654cdd32 Sandeep Tripathy 2017-06-06 198 static int sr_genpll5_clk_init(struct platform_device *pdev)
654cdd32 Sandeep Tripathy 2017-06-06 199 {
654cdd32 Sandeep Tripathy 2017-06-06 200 iproc_pll_clk_setup(pdev->dev.of_node,
654cdd32 Sandeep Tripathy 2017-06-06 201 &sr_genpll5, NULL, 0, sr_genpll5_clk,
654cdd32 Sandeep Tripathy 2017-06-06 202 ARRAY_SIZE(sr_genpll5_clk));
654cdd32 Sandeep Tripathy 2017-06-06 203 return 0;
654cdd32 Sandeep Tripathy 2017-06-06 204 }
654cdd32 Sandeep Tripathy 2017-06-06 205
654cdd32 Sandeep Tripathy 2017-06-06 206 static const struct iproc_pll_ctrl sr_lcpll0 = {
654cdd32 Sandeep Tripathy 2017-06-06 207 .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
654cdd32 Sandeep Tripathy 2017-06-06 208 .aon = AON_VAL(0x0, 2, 19, 18),
654cdd32 Sandeep Tripathy 2017-06-06 209 .reset = RESET_VAL(0x0, 31, 30),
654cdd32 Sandeep Tripathy 2017-06-06 210 .sw_ctrl = SW_CTRL_VAL(0x4, 31),
654cdd32 Sandeep Tripathy 2017-06-06 211 .ndiv_int = REG_VAL(0x4, 16, 10),
654cdd32 Sandeep Tripathy 2017-06-06 212 .pdiv = REG_VAL(0x4, 26, 4),
654cdd32 Sandeep Tripathy 2017-06-06 213 .status = REG_VAL(0x38, 12, 1),
654cdd32 Sandeep Tripathy 2017-06-06 214 };
654cdd32 Sandeep Tripathy 2017-06-06 215
654cdd32 Sandeep Tripathy 2017-06-06 216 static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
654cdd32 Sandeep Tripathy 2017-06-06 @217 [BCM_SR_LCPLL0_SATA_REF_CLK] = {
654cdd32 Sandeep Tripathy 2017-06-06 218 .channel = BCM_SR_LCPLL0_SATA_REF_CLK,
654cdd32 Sandeep Tripathy 2017-06-06 219 .flags = IPROC_CLK_AON,
654cdd32 Sandeep Tripathy 2017-06-06 220 .enable = ENABLE_VAL(0x0, 7, 1, 13),
654cdd32 Sandeep Tripathy 2017-06-06 221 .mdiv = REG_VAL(0x14, 0, 9),
654cdd32 Sandeep Tripathy 2017-06-06 222 },
654cdd32 Sandeep Tripathy 2017-06-06 @223 [BCM_SR_LCPLL0_USB_REF_CLK] = {
654cdd32 Sandeep Tripathy 2017-06-06 224 .channel = BCM_SR_LCPLL0_USB_REF_CLK,
654cdd32 Sandeep Tripathy 2017-06-06 225 .flags = IPROC_CLK_AON,
654cdd32 Sandeep Tripathy 2017-06-06 226 .enable = ENABLE_VAL(0x0, 8, 2, 14),
654cdd32 Sandeep Tripathy 2017-06-06 227 .mdiv = REG_VAL(0x14, 10, 9),
654cdd32 Sandeep Tripathy 2017-06-06 228 },
654cdd32 Sandeep Tripathy 2017-06-06 @229 [BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
654cdd32 Sandeep Tripathy 2017-06-06 230 .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
654cdd32 Sandeep Tripathy 2017-06-06 231 .flags = IPROC_CLK_AON,
654cdd32 Sandeep Tripathy 2017-06-06 232 .enable = ENABLE_VAL(0x0, 9, 3, 15),
654cdd32 Sandeep Tripathy 2017-06-06 233 .mdiv = REG_VAL(0x14, 20, 9),
654cdd32 Sandeep Tripathy 2017-06-06 234 },
654cdd32 Sandeep Tripathy 2017-06-06 235 };
654cdd32 Sandeep Tripathy 2017-06-06 236
:::::: The code at line 217 was first introduced by commit
:::::: 654cdd3229cd1d3f2bfb9df57baf88ba382a52be clk: bcm: Add clocks for Stingray SOC
:::::: TO: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
:::::: CC: Stephen Boyd <sboyd@codeaurora.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 47758 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180602/d7e73bfe/attachment-0001.gz>
next reply other threads:[~2018-06-02 9:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-02 9:01 kbuild test robot [this message]
2018-06-06 21:00 ` [clk:clk-bcm-stingray 1/2] drivers/clk/bcm/clk-sr.c:217:3: error: 'BCM_SR_LCPLL0_SATA_REF_CLK' undeclared here (not in a function); did you mean 'BCM_SR_LCPLL0_SATA_REFN_CLK'? Ray Jui
2018-06-12 8:08 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201806021742.e6HPCQOb%fengguang.wu@intel.com \
--to=lkp@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).