From: anarsoul@gmail.com (Vasily Khoruzhick)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] arm64: dts: allwinner: a64: Add PWM controllers
Date: Tue, 5 Jun 2018 22:17:01 -0700 [thread overview]
Message-ID: <20180606051702.6478-3-anarsoul@gmail.com> (raw)
In-Reply-To: <20180606051702.6478-1-anarsoul@gmail.com>
From: Andre Przywara <andre.przywara@arm.com>
The Allwinner A64 SoC features two PWM controllers, which are fully
compatible to the one used in the A13 and H3 chips.
Add the nodes for the devices (one for the "normal" PWM, the other for
the one in the CPUS domain) and the pins their outputs are connected to.
On the A64 the "normal" PWM is muxed together with one of the MDIO pins
used to communicate with the Ethernet PHY, so it won't be usable on many
boards. But the Pinebook laptop uses this pin for controlling the LCD
backlight.
On Pine64 the CPUS PWM pin however is routed to the "RPi2" header,
at the same location as the PWM pin on the RaspberryPi.
Tested on Pinebook and Teres-I
[vasily: fixed comment message as requested by Stefan Bruens, added default
muxing options to pwm and r_pwm nodes]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Harald Geyer <harald@ccbib.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index dcf957b2e7c8..360bb1a4a504 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -365,6 +365,11 @@
bias-pull-up;
};
+ pwm_pin: pwm_pin {
+ pins = "PD22";
+ function = "pwm";
+ };
+
rmii_pins: rmii_pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
@@ -630,6 +635,17 @@
#interrupt-cells = <3>;
};
+ pwm: pwm at 1c21400 {
+ compatible = "allwinner,sun50i-a64-pwm",
+ "allwinner,sun5i-a13-pwm";
+ reg = <0x01c21400 0x400>;
+ clocks = <&osc24M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
rtc: rtc at 1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
@@ -668,6 +684,17 @@
#size-cells = <0>;
};
+ r_pwm: pwm at 1f03800 {
+ compatible = "allwinner,sun50i-a64-pwm",
+ "allwinner,sun5i-a13-pwm";
+ reg = <0x01f03800 0x400>;
+ clocks = <&osc24M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_pwm_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
r_pio: pinctrl at 1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -690,6 +717,11 @@
function = "s_i2c";
};
+ r_pwm_pin: pwm {
+ pins = "PL10";
+ function = "s_pwm";
+ };
+
r_rsb_pins: rsb {
pins = "PL0", "PL1";
function = "s_rsb";
--
2.17.1
next prev parent reply other threads:[~2018-06-06 5:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-06 5:16 [PATCH v2 0/3] arm64: allwinner: a64: Add initial support for Pinebook Vasily Khoruzhick
2018-06-06 5:17 ` [PATCH v2 1/3] arm64: dts: allwinner: a64: add R_I2C controller Vasily Khoruzhick
2018-06-06 19:32 ` Maxime Ripard
2018-06-06 5:17 ` Vasily Khoruzhick [this message]
2018-06-06 19:32 ` [PATCH v2 2/3] arm64: dts: allwinner: a64: Add PWM controllers Maxime Ripard
2018-06-06 5:17 ` [PATCH v2 3/3] arm64: dts: allwinner: add support for Pinebook Vasily Khoruzhick
2018-06-06 5:20 ` Icenowy Zheng
2018-06-06 5:23 ` Vasily Khoruzhick
2018-06-06 19:37 ` Maxime Ripard
2018-06-06 20:16 ` Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180606051702.6478-3-anarsoul@gmail.com \
--to=anarsoul@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).