From: maxime.ripard@bootlin.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] arm64: dts: allwinner: a64: add R_I2C controller
Date: Wed, 6 Jun 2018 21:32:11 +0200 [thread overview]
Message-ID: <20180606193211.4prhpzn2mbuy6eng@flea> (raw)
In-Reply-To: <20180606051702.6478-2-anarsoul@gmail.com>
On Tue, Jun 05, 2018 at 10:17:00PM -0700, Vasily Khoruzhick wrote:
> From: Icenowy Zheng <icenowy@aosc.io>
>
> Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has
> two groups of pinmuxes on PL bank, so it's called R_I2C.
>
> Add support for this I2C controller and the pinmux which doesn't conflict
> with RSB.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 1b2ef28c42bd..dcf957b2e7c8 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -46,6 +46,7 @@
> #include <dt-bindings/clock/sun8i-r-ccu.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/reset/sun50i-a64-ccu.h>
> +#include <dt-bindings/reset/sun8i-r-ccu.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -655,6 +656,18 @@
> #reset-cells = <1>;
> };
>
> + r_i2c: i2c at 1f02400 {
> + compatible = "allwinner,sun50i-a64-i2c",
> + "allwinner,sun6i-a31-i2c";
> + reg = <0x01f02400 0x400>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&r_ccu CLK_APB0_I2C>;
> + resets = <&r_ccu RST_APB0_I2C>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> r_pio: pinctrl at 1f02c00 {
> compatible = "allwinner,sun50i-a64-r-pinctrl";
> reg = <0x01f02c00 0x400>;
> @@ -666,6 +679,17 @@
> interrupt-controller;
> #interrupt-cells = <3>;
>
> +
> + r_i2c_pins: i2c {
> + pins = "PL0", "PL1";
> + function = "s_i2c";
> + };
> +
We usually don't have pin groups that are not used by any boards. I've
removed it and applied.
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2018-06-06 19:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-06 5:16 [PATCH v2 0/3] arm64: allwinner: a64: Add initial support for Pinebook Vasily Khoruzhick
2018-06-06 5:17 ` [PATCH v2 1/3] arm64: dts: allwinner: a64: add R_I2C controller Vasily Khoruzhick
2018-06-06 19:32 ` Maxime Ripard [this message]
2018-06-06 5:17 ` [PATCH v2 2/3] arm64: dts: allwinner: a64: Add PWM controllers Vasily Khoruzhick
2018-06-06 19:32 ` Maxime Ripard
2018-06-06 5:17 ` [PATCH v2 3/3] arm64: dts: allwinner: add support for Pinebook Vasily Khoruzhick
2018-06-06 5:20 ` Icenowy Zheng
2018-06-06 5:23 ` Vasily Khoruzhick
2018-06-06 19:37 ` Maxime Ripard
2018-06-06 20:16 ` Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180606193211.4prhpzn2mbuy6eng@flea \
--to=maxime.ripard@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox