[PATCH v2 1/4] dt-bindings: add bindings for px30 clock controller

[robh@kernel.org (Rob Herring)]

On Fri, Jun 08, 2018 at 02:31:56PM +0800, Elaine Zhang wrote:
> Add devicetree bindings for Rockchip cru which found on
> Rockchip SoCs.
> 
> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> ---
>  .../bindings/clock/rockchip,px30-cru.txt           | 67 ++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
> new file mode 100644
> index 000000000000..af5a45b680d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
> @@ -0,0 +1,67 @@
> +* Rockchip PX30 Clock and Reset Unit
> +
> +The PX30 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
> +- compatible: CRU should be "rockchip,px30-cru"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> +  If missing, pll rates are not changeable, due to the missing pll lock status.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. All available clocks are defined as
> +preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
> +used in device tree sources. Similar macros exist for the reset sources in
> +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "xin32k" - rtc clock - optional,
> + - "i2sx_clkin" - external I2S clock - optional,
> + - "gmac_clkin" - external GMAC clock - optional
> +
> +Example: Clock controller node:
> +
> +	pmucru: pmu-clock-controller at ff2bc000 {

s/pmu-clock-controller/clock-controller/

> +		compatible = "rockchip,px30-pmucru";
> +		reg = <0x0 0xff2bc000 0x0 0x1000>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
> +	cru: clock-controller at ff2b0000 {
> +		compatible = "rockchip,px30-cru";
> +		reg = <0x0 0xff2b0000 0x0 0x1000>;
> +		rockchip,grf = <&grf>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
> +Example: UART controller node that consumes the clock generated by the clock
> +  controller:
> +
> +	uart0: serial at ff030000 {
> +		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
> +		reg = <0x0 0xff030000 0x0 0x100>;
> +		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
> +		clock-names = "baudclk", "apb_pclk";
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		status = "disabled";

Don't show status in examples.

> +	};
> +
> -- 
> 1.9.1
> 
>